50mm Unilin XtroLiner XO/PR Pitched Roof PIR Insulation Board - 1200mm x 2400mm - Pack of 6
50mm Unilin XtroLiner XO/PR Pitched Roof PIR Insulation Board - 1200mm x 2400mm - Pack of 6
- Product Code: A1-5014
- Delivery Time: 1-3 working days
- Brand: Unilin (prev. Xtratherm) (Tech. support: 03712221055)
- Model: 1200x2400mm - 17.28m2
Our ratings on 12-06-2026:
4.8 out of 5
50mm Unilin XtroLiner XO/PR Pitched Roof PIR Insulation Board - 1200mm x 2400mm - Pack of 6
Length: 2400mm
Width: 1200mm
Thickness: 50mm
Pack Quantity: 6
Board Coverage: 2.88m2
Pack coverage: 17.28m2
Thermal Conductivity: 0.021W/mK
R-Value: 2.35m2K/W
Compressive Strength: 150kPa
50mm Unilin XtroLiner XO/PR board has a core of modified polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings. Unilin XtroLiner XO/PR board offers excellent insulation performance with excellent thermal conductivity. Unilin XtroLiner XO/PR is CFC & HCFC free and is manufactured under the highest standards of ISO 9001 and 14001 Quality and Environmental Management Systems.
Note: This product was formerly known as 50mm Xtratherm XtroLiner XO/PR Pitched Roof PIR Insulation Board
CHARACTERISTICS
- High Thermal Performance Rigid Insulation,
- Easy to Install,
- Non-deleterious material,
- Suitable for new build and refurbishment,
- Manufactured with zero ODP blowing agent,
- Reduces Thermal Bridging,
- Reaction to fire: Euroclass C s2 d0,
- Closed cell structure – moisture resistant
APPLICATION
- Pitched roof
- Ventilated roof
- Warm roof
- Above and between rafters
- Under rafters, above ceilings
INSTALLATION
Ventilated Roofs
- Allow for ventilation gaps normally 50mm. (May be reduced depending on breather membrane certification).
- Cut XtroLiner boards to fit tightly between rafters flush with rafter bottom. An additional 2nd layer should be added to the underside of the rafter.
- Run second layer transverse to the first.
- Temporarily fix with nails.
- Provide vapour control layer (Aluminium tape joints).
- Finish with 12.5mm plasterboard fixed with drylining screws. Screw fix every 150mm, 12mm from edge of boards.
- All board edges should be supported.
Warm roofs
- Ensure cavity wall insulation has continued to roof height to engage with roof insulation.
- Fix a timber stop rail to end of rafter at eaves.
- Lay Unilin XtrolinerXO/PR insulation stagger jointed over rafters ensuring joints are supported by rafters.
- Ensure boards are tightly butted fill any gaps with expanding foam. A vapour permeable underlay should be fitted; refer to manufacturers Agrèment certification.
- Providing an unvented void under the membrane can improve the thermal performance.
- Fix counter batten with approved fixings.
- Ventilation may have to be provided subject to certification.
- A second layer of insulation may be added between the rafters.
- Provide a vapour control layer to the underside of the construction.
- Current Building Regulations/Standards should be considered with regard to the requirements for and/or provision of fire stops.
CERTIFICATION
BBA_Certificate_Xtroliner_XO_PR.pdf
Brand: Unilin (prev. Xtratherm)
Model: Unilin Xtrafall
Delivery Time: 7 - 10 days
Unilin Xtrafall is a tapered roofing insulation system designed to deliver both thermal performance and bespoke drainage on flat roofs. By combining rigid Polyisocyanurate (PIR) insulation boards with precision‑engineered falls, the system eliminates standing water and the consequent damage often as..
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 450mm - 1.62m2
Delivery Time: 7 - 10 days
110mm Unilin Safe-R 019/CW Phenolic Partial Fill Cavity Insulation Board is a high‑performance phenolic insulation panel designed for traditional masonry cavity walls. It delivers excellent thermal efficiency while preserving a clear residual cavity, helping protect buildings from wind‑driven rain. ..
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200mm - 14.40m2
Delivery Time: 2 - 3 working days
60mm Unilin Safe-R SR/FB Phenolic foam is a superior performance rigid insulation framing board with enhanced fire performance, consisting of an Euroclass B-s1, d0 phenolic foam core with negligible smoke obscuration. Unilin Safe-R SR is faced with low emissivity aluminium facings both sides, and ha..
Brand: Unilin (prev. Xtratherm)
Model: 1200x450mm - 2.16m2
Delivery Time: 1-3 working days
125mm Unilin ECO360/CT CavityTherm Full Fill Cavity Wall board has a core of modified polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings offering excellent insulation performance with thermal conductivity. Unilin ECO360 CT board reduces the junctions prone to ..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200x450mm - 4.86m2
Delivery Time: 2 - 4 days
50mm Unilin ThinR XT/CW Partial Fill Cavity Wall Insulation Board is a PIR insulation board with a high thermal performance whilst maintaining a residual cavity in the external walls. This board achieves high standards of insulation with a certified thermal conductivity of 0.022W/mK with the op..
Guide Price: £63.32
£75.98 inc VAT
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 2.88m2
Delivery Time: 7 - 10 days
112.5mm Unilin Safe-R 019/TB-MF Phenolic Composite Insulated Panel is a composite insulated panel designed to provide high thermal performance and drylining in a single operation. It combines a rigid phenolic insulation core with a composite foil facing, factory‑bonded to 12.5 mm tapered‑edge plaste..