50mm Heaveguard - Expanded Polystyrene Board Used Against Ground Heave - 2400mm x 1200mm
50mm Heaveguard - Expanded Polystyrene Board Used Against Ground Heave - 2400mm x 1200mm
- Product Code: A1-3739
- Delivery Time: 2 - 3 working days
- Brand: Cordek (Tech. support: 01403799600)
- Model: 2400x1200mm - 2.88m2
Our ratings on 05-01-2026:
4.8 out of 5
50mm Heaveguard - Expanded Polystyrene Board Used Against Ground Heave - 2400mm x 1200mm
Width: 1200mm
Length: 2400mm
Board Coverage: 2.88m2
50mm Heaveguard is a compressible low density Expanded Polystyrene (EPS) board, used when foundations need to be protected against ground heave and against lateral heave. Heaveguard is used to prevent potential problems in foundations due to moisture movement in soils, such as clay heave, reducing pressure on ground beams in piled foundations, and on the sides of trench fills. The expansion and contraction process during wet and dry periods is known as clay heave and this can cause severe problems with foundations. Heaveguard can be used as permanent shuttering for cast in-situ reinforced concrete.
APPLICATION
- When foundations need to be protected against ground heave and against lateral heave.
CHARACTERISTICS
- A rapid, cost effective solution to clay-heave problems,
- The initial compression of the material during casting can be disregarded,
- It is rot-proof and durable and will withstand the conditions encountered below ground,
- It will not degrade in the presence of high levels of ground water or precipitation.
CERTIFICATION
- BBA Certified - Certificate number 17/5448.
BBA_Certificate_Heaveguard.pdf
Brand: Cordek
Model: Filcor 190 - 1200x2400mm
Delivery Time: 1 - 2 days
Filcor 190 EPS (Expanded Polystyrene) is used as a lightweight structural fill alternative to more traditional fill materials or as a lightweight void former in structural concrete. It can be used up to 7600mm thick of 25kN/m3 concrete above it. Note: Filcor EPS sheet can be ordered to the req..
Brand: Cordek
Model: 2400x1200mm - 2.88m2
Delivery Time: 3 - 7 days
160mm Cellcore HX S is a product specially designed to provide foundation protection from ground heave effects when installed under reinforced concrete floor slabs. It is consisted of specially moulded hexagonal cellular expended polystyrene, available in a number of different depths and grades..
Brand: Cordek
Model: HX B 85mm - 2.88m2
Delivery Time: 3 - 7 days
85mm Cellcore HX B Under Beam is specially designed to provide foundation protection from ground heave effects when installed beneath reinforced ground beams and pile caps. It is consisted of specially moulded hexagonal cellular Filcor expended polystyrene, available in a number of different de..
Brand: Cordek
Model: 1200mm x 2400mm - 2.88m2
Delivery Time: 3 - 5 days
270mm Cordek Cellvent HX - Grade 18/24 is a product specially designed to provide foundation protection from ground heave effects whilst also providing an excellent gas venting medium when installed under reinforced concrete floor slabs where subsidence is not expected. Cellvent HX provides protecti..
Brand: Cordek
Model: Filcor 70 - 1200x2400mm
Delivery Time: 1 - 2 days
Filcor 70 EPS (Expanded Polystyrene) is used as a lightweight structural fill alternative to more traditional fill materials or as a lightweight void former in structural concrete. It can be used up to 2800mm thick of 25kN/m3 concrete above it. Note: Filcor EPS sheet can be ordered to the requ..
Brand: Cordek
Model: 1200mm x 2400mm - 2.88m2
Delivery Time: 3 - 5 days
135mm Cordek Cellvent HX - Grade 7/10 is a product specially designed to provide foundation protection from ground heave effects whilst also providing an excellent gas venting medium when installed under reinforced concrete floor slabs where subsidence is not expected. Cellvent HX provides protectio..