60mm STEICO Safe - Sarking and Sheathing Board with Integrated Membrane - 1880mm x 600mm - Pallet of 36
60mm STEICO Safe - Sarking and Sheathing Board with Integrated Membrane - 1880mm x 600mm - Pallet of 36
- Product Code: A1-7003
- Delivery Time: 2 - 4 weeks
- Brand: Steico
- Model: 1880mm x 600mm - 40.68m2
- Weight: 341.71kg
Our ratings on 11-11-2026:
4.8 out of 5
60mm STEICO Safe - Sarking & Sheathing Board with Integrated Membrane - 1880mm x 600mm - Pallet of 36
Length: 1880mm
Width: 600mm
Thickness: 60mm
Single Coverage: 1.13m2
Pallet coverage: 40.68m2
Density: 140kg/m3
Weight/m2: 8.4kg
Weight: 341.71kg
Thermal Conductivity: 0.040W/mK
R-Value: 1.5m2K/W
Compressive Strength: 100kPa
Fire Rating (Reaction to Fire): E
60mm STEICO Safe is a multi-functional, rigid wood-fibre insulation board designed for roofs with increased rain protection requirements. It is the only board in the range that can be used on low-pitch roofs (as low as 5°) without the need for an additional full-surface roofing felt or membrane, thanks to its factory-laminated, vapour-permeable top layer. STEICO Safe is essentially the high-spec version of the Universal board. While most boards rely on their natural density and paraffin treatment to shed water, STEICO Safe goes a step further by including an integrated, factory-applied waterproof membrane. This makes it the specialist choice for high-exposure areas and very shallow-pitched roofs.
CHARCTERISTICS
- Each board comes with a pre-laminated, 3-ply functional membrane. This membrane includes a self-adhesive overlap, allowing for a primary water-shedding layer to be created as the boards are laid.
- Designed specifically for roof pitches between 5° and 15°, where standard wood-fibre boards would typically require a separate secondary membrane.
- Because of the integrated membrane, STEICO Safe can remain exposed as a temporary roof covering for up to 8 weeks—double the exposure time of the standard Universal board.
- Manufactured using the "Dry Process," it provides exceptional thermal performance.
- Acts as the insulation layer, the wind-tight layer, and the primary secondary-drainage layer in a single installation step.
APPLICATION
- Low-Pitch Roofs: For modern, shallow-pitched roof designs where water run-off is slower and the risk of ingress is higher.
- Behind Brickwork Facades: Often used as a high-performance sheathing board behind masonry or brick-tie systems to provide a robust, insulated, and wind-tight "back-stop."
- High-Exposure Sites: Recommended for buildings in coastal or mountainous regions where extreme driving rain is expected.
CERTIFICATIONS
Steico_Safe_Technical_Data_Sheet.pdf
Brand: Steico
Model: 1200mm x 400mm - 5.76m2
Delivery Time: 2 - 4 weeks
200mm STEICO Protect L Dry is a lightweight, rigid wood-fibre insulation board designed specifically for ETICS (External Thermal Insulation Composite System) applications. It is engineered to be bonded directly to flat, solid surfaces such as masonry, brickwork, or Cross Laminated Timber (CLT), prov..
Brand: Steico
Model: 1190mm x 375mm - 1.78m2
Delivery Time: 2 - 4 days
140mm STEICOflex 036 is a flexible, high‑performance wood‑fibre insulation slab designed for exceptional thermal comfort, acoustic absorption and healthy building performance. Made from sustainably sourced wood and certified to rigorous European standards, it offers one of the best thermal conductiv..
Brand: Steico
Model: 310ml - pack of 12
Delivery Time: 2 - 4 weeks
STEICOmulti Connect is a professional-grade, permanently elastic adhesive sealant. It is the go-to solution for creating airtight connections between membranes and difficult or uneven substrates, such as masonry, concrete, or rough timber, where traditional tapes might struggle to maintain a continu..
Brand: Steico
Model: 2230mm x 600mm - 63.28m2
Delivery Time: 2 - 4 weeks
40mm STEICO Universal Dry is a high-performance, rigid wood-fibre board designed for both roof and wall applications. It is engineered to provide a wind-tight, weather-protecting "skin" for the building envelope. Using the dry manufacturing process allows for a board that is easier to handle than it..
Brand: Steico
Model: 1880mm x 600mm - 1.13m2
Delivery Time: 2 - 4 days
35mm STEICO Universal Wet Wood-Fibre Insulation Board - Sarking and Sheathing Board - 1880mm x 600mm
35mm STEICO Universal Wet is a high-density, rigid wood-fibre insulation board designed for both roof and wall applications. Manufactured using the traditional Wet Process, it relies on the wood’s natural lignin to bond the fibres together, creating a robust, vapour-open board that is exceptionally ..
Brand: Steico
Model: 1350mm x 600mm - 45.36m2
Delivery Time: 2 - 4 weeks
40mm STEICOtherm Dry is a multi-purpose, rigid wood-fibre insulation slab. Because of its manufacturing process, it is significantly lighter than the "Wet" version, making it the preferred choice for large-scale roof and wall applications where reducing the structural load is key. the STEICOtherm Dr..