80mm STEICO Safe - Sarking and Sheathing Board with Integrated Membrane - 1880mm x 600mm - Pallet of 28
80mm STEICO Safe - Sarking and Sheathing Board with Integrated Membrane - 1880mm x 600mm - Pallet of 28
- Product Code: A1-7004
- Delivery Time: 2 - 4 weeks
- Brand: Steico
- Model: 1880mm x 600mm - 31.64m2
- Weight: 354.37kg
Our ratings on 11-11-2026:
4.8 out of 5
80mm STEICO Safe - Sarking & Sheathing Board with Integrated Membrane - 1880mm x 600mm - Pallet of 28
Length: 1880mm
Width: 600mm
Thickness: 80mm
Single Coverage: 1.13m2
Pallet coverage: 31.64m2
Density: 140kg/m3
Weight/m2: 11.2kg
Weight: 354.37kg
Thermal Conductivity: 0.040W/mK
R-Value: 2m2K/W
Compressive Strength: 100kPa
Fire Rating (Reaction to Fire): E
80mm STEICO Safe is a multi-functional, rigid wood-fibre insulation board designed for roofs with increased rain protection requirements. It is the only board in the range that can be used on low-pitch roofs (as low as 5°) without the need for an additional full-surface roofing felt or membrane, thanks to its factory-laminated, vapour-permeable top layer. STEICO Safe is essentially the high-spec version of the Universal board. While most boards rely on their natural density and paraffin treatment to shed water, STEICO Safe goes a step further by including an integrated, factory-applied waterproof membrane. This makes it the specialist choice for high-exposure areas and very shallow-pitched roofs.
CHARCTERISTICS
- Each board comes with a pre-laminated, 3-ply functional membrane. This membrane includes a self-adhesive overlap, allowing for a primary water-shedding layer to be created as the boards are laid.
- Designed specifically for roof pitches between 5° and 15°, where standard wood-fibre boards would typically require a separate secondary membrane.
- Because of the integrated membrane, STEICO Safe can remain exposed as a temporary roof covering for up to 8 weeks—double the exposure time of the standard Universal board.
- Manufactured using the "Dry Process," it provides exceptional thermal performance.
- Acts as the insulation layer, the wind-tight layer, and the primary secondary-drainage layer in a single installation step.
APPLICATION
- Low-Pitch Roofs: For modern, shallow-pitched roof designs where water run-off is slower and the risk of ingress is higher.
- Behind Brickwork Facades: Often used as a high-performance sheathing board behind masonry or brick-tie systems to provide a robust, insulated, and wind-tight "back-stop."
- High-Exposure Sites: Recommended for buildings in coastal or mountainous regions where extreme driving rain is expected.
CERTIFICATIONS
Steico_Safe_Technical_Data_Sheet.pdf
Brand: Steico
Model: 1350mm x 600mm - 30.78m2
Delivery Time: 2 - 4 weeks
60mm STEICOtherm Dry is a multi-purpose, rigid wood-fibre insulation slab. Because of its manufacturing process, it is significantly lighter than the "Wet" version, making it the preferred choice for large-scale roof and wall applications where reducing the structural load is key. the STEICOtherm Dr..
Brand: Steico
Model: 1220mm x 575mm - 128.80m2
Delivery Time: 2 - 4 weeks
25mm STEICOflex 036 Inserts are designed to fill the "C" shaped void on either side of an I-joist web. By installing these inserts, you transform the irregular I-shape of the joist into a solid rectangular cross-section. This makes the subsequent installation of the main insulation layer much faster..
Brand: Steico
Model: 1Litre
Delivery Time: 2 - 4 days
STEICOmulti Primer is a high-performance, solvent-free primer designed to prepare porous or mineral substrates for the application of STEICOmulti self-adhesive tapes and membranes. It penetrates the surface of wood-fibre boards to create a solid, tacky bridge that ensures a permanent, airtight bond...
Brand: Steico
Model: 1200mm x 400mm - 5.76m2
Delivery Time: 2 - 4 weeks
200mm STEICO Protect L Dry is a lightweight, rigid wood-fibre insulation board designed specifically for ETICS (External Thermal Insulation Composite System) applications. It is engineered to be bonded directly to flat, solid surfaces such as masonry, brickwork, or Cross Laminated Timber (CLT), prov..
Brand: Steico
Model: 1880mm x 600mm - 1.13m2
Delivery Time: 2 - 4 days
60mm STEICO Special Dry is a multi-purpose, rigid wood-fibre insulation board manufactured using the modern Dry Process. It is designed to be installed on top of rafters (sarking) or on the outside of timber frame studs (sheathing). Because it is produced in a dry process, it can be manufactured in ..
Brand: Steico
Model: 1350mm x 600mm - 0.81m2
Delivery Time: 2 - 4 days
20mm STEICOtherm Wet is an ecological, vapour-open insulation board designed for applications where moisture management and thermal mass are critical. The Square Edge (SE) profile makes it particularly suitable for internal wall insulation (IWI) and floor systems where a tight, flush fit is required..