60mm STEICO Special Dry Wood-Fibre Insulation Board - Sarking and Sheathing Board - 2230mm x 600mm - Pallet of 36
60mm STEICO Special Dry Wood-Fibre Insulation Board - Sarking & Sheathing Board - 2230mm x 600mm - Pallet of 36
Length: 2230mm
Width: 600mm
Thickness: 60mm
Board coverage: 48.24m2
Density: 140kg/m3
Weight/m2: 8.4kg
Weight: 405.22kg
Thermal Conductivity: 0.040W/mK
R-Value: 1.5m2K/W
Fire Rating (Reaction to Fire): E
60mm STEICO Special Dry is a multi-purpose, rigid wood-fibre insulation board manufactured using the modern Dry Process. It is designed to be installed on top of rafters (sarking) or on the outside of timber frame studs (sheathing). Because it is produced in a dry process, it can be manufactured in significantly greater thicknesses than the wet-process equivalent. The STEICO Special Dry is specifically engineered for high-performance renovations and new builds where maximum thermal insulation and thick profiles are required.
CHARCTERISTICS
- 4-Fold Functionality: It provides four critical building functions in a single product: thermal insulation, wind tightness, temporary weather protection, and a direct substrate for render or cladding.
- Superior Thermal Efficiency: It offers better pure insulation performance than the denser Universal boards, helping to meet strict U-value targets with less bulk.
- Exceptional Summer Heat Protection: Despite being lighter than wet boards, its density of 140kg/m3 still provides high thermal mass. This creates a "decrement delay" that keeps the building interior cool during hot summer days.
- Precision Tongue & Groove: Featuring an engineered T&G profile on all four sides, it creates a wind-tight, interlocking layer that drastically reduces thermal bridging and eliminates the need for additional joint taping in many applications.
- Extended Weather Protection: Once installed, these boards can be exposed to the elements for up to 12 weeks on new build projects (or 4 weeks for renovations), allowing the internal work to proceed before the final roof or wall finish is applied.
APPLICATION
- Over-Rafter Insulation (Sarking): The ideal choice for roof renovations where rafters aren't deep enough for modern insulation standards. It sits on top of the rafters, wrapping the entire roof in a continuous thermal blanket.
- External Wall Sheathing: Used on timber frame or solid wood walls to provide a breathable, weather-resistant envelope that can be finished with timber cladding or a direct-applied render system.
- Passive House & Low Energy Builds: Frequently specified in high-performance projects due to its ability to virtually eliminate cold bridging at structural junctions.
CERTIFICATIONS

Brand: Steico
Model: 1190mm x 575mm - 6.16m2
Delivery Time: 2 - 4 days
50mm STEICOflex 036 is a flexible, high‑performance wood‑fibre insulation slab designed for exceptional thermal comfort, acoustic absorption and healthy building performance. Made from sustainably sourced wood and certified to rigorous European standards, it offers one of the best thermal conductivi..
Brand: Steico
Model: 1200mm x 380mm - 0.46m2
Delivery Time: 2 - 4 days
100mm STEICOtherm Internal Wet is an ecological, vapour-open insulation board designed for applications where moisture management and thermal mass are critical. The Square Edge (SE) profile makes it particularly suitable for internal wall insulation (IWI) and floor systems where a tight, flush fit i..
Brand: Steico
Model: 400mm x 1200mm - 10.56m2
Delivery Time: 2 - 4 weeks
100mm STEICO Top is a high-density wood-fibre insulation board with a specially hardened surface. It is designed to be laid directly onto the floor of a cold loft (the ceiling of the room below), providing a quick and efficient way to thermally upgrade a building without the need for a complex timbe..
Brand: Steico
Model: 70mm x 25m roll - 20/50 split
Delivery Time: 2 - 4 days
STEICOmulti Tape Black is a high-quality, single-sided adhesive tape designed for permanent, airtight, and wind-tight sealing. While engineered for aesthetic discretion in open-jointed facades, it is a versatile all-rounder that can be used both internally and externally. Available Widths: 70mm..
Brand: Steico
Model: 1350mm x 600mm - 30.78m2
Delivery Time: 2 - 4 weeks
60mm STEICOtherm Dry is a multi-purpose, rigid wood-fibre insulation slab. Because of its manufacturing process, it is significantly lighter than the "Wet" version, making it the preferred choice for large-scale roof and wall applications where reducing the structural load is key. the STEICOtherm Dr..
Brand: Steico
Model: 1880mm x 600mm - 63.28m2
Delivery Time: 2 - 4 weeks
40mm STEICO Safe is a multi-functional, rigid wood-fibre insulation board designed for roofs with increased rain protection requirements. It is the only board in the range that can be used on low-pitch roofs (as low as 5°) without the need for an additional full-surface roofing felt or membrane, tha..






