6mm JCW Fibre Cement Tile Backer Board - 1200mm x 600mm
6mm JCW Fibre Cement Tile Backer Board - 1200mm x 600mm
- Product Code: A1-7141
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model: 1200mm x 600mm - 0.72m2
Our ratings on 20-11-2026:

4.8 out of 5
6mm JCW Fibre Cement Tile Backer Board - 1200mm x 600mm
Length: 1200mm
Width: 600mm
Thickness: 6mm
Board coverage: 0.72m2
6mm JCW Fibre Cement Tile Backer Board is a professional-grade, high-performance fibre cement panel engineered to meet the rigours of modern construction. It represents a significant upgrade over traditional materials like plywood or plasterboard, which are prone to rotting, warping, or losing structural integrity when exposed to moisture. Because it is manufactured from a dense blend of Portland cement and reinforcing fibres, this board is naturally immune to the effects of water and extreme temperature fluctuations.
CHARACTERISTICS
- It carries a full Euroclass A1 non-combustible rating, the highest level of fire safety available. This makes it a critical specification for high-rise buildings and areas near heat sources like fireplaces or stoves.
- Unlike gypsum-based boards, the JCW board is inherently waterproof. It will not swell or degrade in saturated environments, making it the gold standard for wet rooms and commercial kitchens.
- The rigid nature of fibre cement allows the board to support significantly heavier loads, such as large-format natural stone or porcelain tiles, without sagging or failing.
- It is robust enough for both internal and external applications. It resists ultraviolet light and frost, allowing it to be used as a stable backing for exterior render or stone slips.
APPLICATION
- Bathrooms and Wet Rooms: It is the primary choice for shower enclosures and walk-in wet rooms. Because it is waterproof and does not swell, it provides a permanent, rot-proof base for tiling.
- Kitchen Floors and Splashbacks: Use it to overboard timber floors before laying large-format tiles. It eliminates the bounce (deflection) that causes grout lines to crack.
- Commercial Kitchens: It can withstand the heavy-duty cleaning and high moisture levels found in professional catering environments.
- Public Washrooms: Used in sports centres, schools, and shopping malls where wall surfaces need to be extremely tough and resistant to impact.
- Outdoor Kitchens and BBQ Areas: Perfect for building the carcases and worktops of outdoor cooking stations, as it is unaffected by rain, frost, or heat from the grill.
INSTALLATION
- For a clean edge without power tools, use the score and snap method with a dedicated fibre cement knife. If using a circular saw, a dust extraction system must be employed to manage cement particles.
- Always bond the boards to the substrate using a cement-based flexible tile adhesive. This ensures a full-contact bond and eliminates any voids.
- Secure the boards to timber floors using 25mm cement board fixings at 250mm centres. This tight fixing pattern is essential for eliminating the bounce (deflection) that causes grout to crack.
- To prevent crack propagation, all board joints should be reinforced with alkali-resistant mesh tape before the final finish is applied.
Brand: JCW
Model: 2400x600mm - 1.44m2
Delivery Time: 2 - 3 working days
37mm JCW Acoustic Deck 37C is a 15mm resilient acoustic layer laminated to a 22mm T&G chipboard, designed for fitting direct to joist. Acoustic Deck 37 is specially designed for direct to joist fitment after existing timber floor has been removed. After removing existing timber floors, there is no n..
Guide Price: £67.54
£81.05 inc VAT
Brand: JCW
Model: 1200mm x 1200mm - 1.44m2
Delivery Time: 2 - 3 working days
24.5mm JCW Silent Board is an acoustic wall liner manufactured by laminating a 12mm acoustic resilient layer to a 12.5mm layer of acoustic grade plasterboard to drastically reduce sound transmission. It can be applied to either masonry or stud walls and is also suitable to reduce flanking noise up a..
Guide Price: £49.94
£59.93 inc VAT
Brand: JCW
Model: 1m x 5m - 5m2
Delivery Time: 2 - 3 working days
10mm JCW Impacta Rubber Roll is Sound Insulation System for concrete floors, robust resilient under screed layer system. It is suitable for precast and solid concrete floors (minimum weight 300kg/m2). JCW Impacta Rubber is a tough, puncture-proof, heavy material designed for the professional buildi..
Guide Price: £87.34
£104.81 inc VAT
Brand: JCW
Model: 5mm x 150mm - Free Delivery
Delivery Time: 2 - 3 working days
5mm JCW Perimeter Edging Strip is a foam strip to isolate acoustic flooring from perimeter walls and maintain the acoustic integrity of the structure. For use with Acoustic Battens, Acoustic Cradles and Acoustic Decks.APPLICATIONTo isolate acoustic flooring from perimeter walls CERTIFICATIONIt has b..
Guide Price: £33.33
£40.00 inc VAT
Brand: JCW
Model: 1200mm x 600mm - 0.72m2
Delivery Time: 2 - 3 working days
6mm JCW Fibre Cement Tile Backer Board is a specialist, high-density fibre cement board engineered to serve as the ultimate substrate for demanding tiling projects. Built for modern construction standards, it bridges the gap between structural integrity and delicate finishing, offering a surface tha..
Brand: JCW
Model: 80x42x1800mm
Delivery Time: 2 - 3 working days
JCW Acoustic Batten 80T is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 70mm timber batten for use on timber subfloors. The JCW Acoustic Batten 80T offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with an..
Guide Price: £6.08
£7.30 inc VAT



