6mm JCW SilenceCem - High Performance Tile Backer Board - 1200mm x 600mm

6mm JCW SilenceCem - High Performance Tile Backer Board - 1200mm x 600mm

6mm JCW Fibre Cement Tile Backer Board is a specialist, high-density fibre cement board engineered to serve as the ultimate substrate for demanding tiling projects. Built for modern construction standards, it bridges the gap between structural integrity and delicate finishing, offering a surface that is as tough as the masonry it often protects. JCW SilenceCem focuses on density and stability, which are critical for preventing the microscopic movements that lead to cracked grout and blown tiles.

CHARACTERISTICS

• A1 Non-Combustible Fire Rating is the highest possible safety classification. Because it is a mineral-based cement board, it will not burn or contribute to fire spread, making it an essential specification for high-rise residential projects and commercial developments.
• Unlike timber-based boards (like plywood or chipboard) or gypsum-based products, SilenceCem is unaffected by moisture and extreme temperature swings. It will not swell, warp, or rot, ensuring your tile bond remains permanent.
• The high-density nature of the board allows it to support the immense weight of modern large-format porcelain, natural marble, and stone slabs. It provides a rigid, deflection-free base that standard boards simply cannot match.
• UV-resistant and fully weatherproof, this board is equally at home on an internal wet room wall as it is on an external balcony or terrace.
• Immune to mould growth, fungal attack, and rodent damage.
• Excellent performance when paired with underfloor heating systems, as it will not expand or contract when the heat is turned on.
• Provides an exceptional mechanical key for cement-based flexible tile adhesives.

APPLICATION

• Floors: Overboarding timber floorboards, chipboard or T&G boards to reduce deflection before tiling
• Walls: Internal walls, partition walls, shower surrounds, kitchens and bathrooms

INSTALLATION

• Score and snap with a fibre cement knife or use a circular saw with a dust extraction system
• Screw with 25mm cement board fixings to timber floors at 250mm centres, or as specified by the manufacturer.
• Use a cement-based flexible tile adhesive to bond the boards to the substrate.
• Use SBR primer to coat boards if required as specified by the manufacturer
• Tape joints with alkali-resistant mesh tape to prevent crack propagation.