92.5mm Unilin Safe-R SR/TB-MF (80mm Phenolic Core and 12.5mm Plasterboard) - Mechanical Fixing (pack of 4)
Guide Price
92.5mm Unilin Safe-R SR/TB-MF (80mm Phenolic Core and 12.5mm Plasterboard) - Mechanical Fixing (pack of 4)
Guide Price: £495.03 (£594.04 inc VAT)
Price per m2: £42.97/m2 (£51.57 inc VAT)
- Product Code: A1-4888
- Delivery Time: 2 - 3 working days
- Brand: Unilin (prev. Xtratherm) (Tech. support: 03712221055)
- Model: 2400x1200 - 11.52m2
Our ratings on 13-04-2026:
4.8 out of 5
92.5mm Unilin Safe-R SR/TB-MF (80mm Phenolic Core + 12.5mm Plasterboard) - Mechanical Fixing (pack of 4)
Length: 2400mm
Width: 1200mm
Thickness: 92.5mm
Pack Quantity: 4
Board Coverage: 2.88m2
Pack Coverage: 11.52m2
Thermal Conductivity: 0.021W/mK
R-Value: 3.9m2K/W
92.5mm Unilin Safe-R SR/TB-MF is a composite insulated panel of 80mm Phenolic core with a composite foil facing bonded to a 12.5mm tapered edge plasterboard for internal applications, mechanically fixed. Unilin Safe-R SR/TB-MF is designed to provide high levels of thermal insulation and dry lining in one operation for masonry walls. Unilin Safe-R SR/TB-MF incorporates an integral vapour control layer, which helps to reduce the risk of condensation. It can be used as a composite plasterboard for internal walls, sloped roofs and ceilings.
Note: This product was formerly known as 92.5mm Xtratherm Safe-R Thermal Liner SR/TB-MF
CHARACTERISTICS
- Superior performance phenolic foam,
- Low thermal conductivity,
- Effective thermal and fire performance,
- Can be readily cut using a fine toothed saw,
- Rot proof and will remain effective for the life span of the building,
APPLICATION
- Internal wall drylining for new build or refurbishment,
- For internal walls, sloped roofs and ceilings.
INSTALLATION
- Fix a pre-treated timber batten horizontally at ceiling level and another 20mm above the finished floor level.
- Fix vertical battens at max 600mm centres.
- Ensure battens are wide enough to offer 20mm support to all four edges of the plasterboard.
- Pack battens if necessary to level the wall.
- Trim all openings and service penetrations with timber battens.
- Insulation should be cut back to accommodate an adjoining panel at external corners.
- Lift the SR/TB-MF into position using wedges on the floor.
- Screws should be fixed to the timber batten at 150mm centres, at least 12mm in from the board edge.
- The fixings should penetrate at least 25mm into the batten.
- Installation must be in accordance BS 8212:1988.
- Fill any gaps with foam filler.
CERTIFICATION
Unilin Safe-R SR/TB is manufactured to EN ISO 13166 under - Quality Systems approved to EN ISO 9001, Quality Management,
- EN ISO 14001 Environmental Management,
- ISO 45001 Occupational Health and Safety Management System.
Note: Bonding of the Unilin Insulation board with other materials may be made by Unilin or a different fabricator.
Unilin_SR_TB-MF_datasheet.pdf
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 2.88m2
Delivery Time: 2 - 3 working days
81mm Unilin Safe-R 019/STP Phenolic Soffit Insulation Board is a high‑performance phenolic soffit insulation board designed for structural ceiling applications where both thermal efficiency and fire performance are critical. It combines a rigid phenolic insulation core with low‑emissivity foil ..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 1200mm - 4.32m2
Delivery Time: 3 - 5 days
130mm Unilin FR-BGM is a a BBA certified high performance PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. Unilin FR-BGM is suitable to apply torch on felt directly on the insulation...
Guide Price: £125.63
£150.76 inc VAT
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 2.88m2
Delivery Time: 7 - 10 days
156mm Unilin Safe-R 019/STP Phenolic Soffit Insulation Board is a high‑performance phenolic soffit insulation board designed for structural ceiling applications where both thermal efficiency and fire performance are critical. It combines a rigid phenolic insulation core with low‑emissivity foil..
Brand: Unilin (prev. Xtratherm)
Model: 1200x450mm - 3.24m2
Delivery Time: 1-3 working days
75mm Unilin XtroLiner XO/CW board has a tongue and groove core of modified polyisocyanurate (PIR) bonded to low emissivity aluminium foil facings offering excellent insulation performance with thermal conductivity. Unilin XtroLiner XO/CW board reduces the junctions prone to thermal bridging imp..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 2.88m2
Delivery Time: 1-3 working days
90mm Unilin Thin-r XT/PR-UF has a core of polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings. Unilin XT/PR-UF board offers excellent insulation performance with excellent thermal conductivity. Unilin XT/PR-UF is CFC & HCFC free and is manufactured under the high..
Guide Price: £43.57
£52.28 inc VAT
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200mm - 11.52m2
Delivery Time: 1-3 working days
80mm Unilin Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Unilin Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Unilin Thin-R FR..