92.5mm Unilin Safe-R SR/TB-MF (80mm Phenolic Core and 12.5mm Plasterboard) - Mechanical Fixing (pack of 4)
Guide Price
92.5mm Unilin Safe-R SR/TB-MF (80mm Phenolic Core and 12.5mm Plasterboard) - Mechanical Fixing (pack of 4)
Guide Price: £495.03 (£594.04 inc VAT)
Price per m2: £42.97/m2 (£51.57 inc VAT)
- Product Code: A1-4888
- Delivery Time: 2 - 3 working days
- Brand: Unilin (prev. Xtratherm) (Tech. support: 03712221055)
- Model: 2400x1200 - 11.52m2
Our ratings on 24-08-2026:
4.8 out of 5
92.5mm Unilin Safe-R SR/TB-MF (80mm Phenolic Core + 12.5mm Plasterboard) - Mechanical Fixing (pack of 4)
Length: 2400mm
Width: 1200mm
Thickness: 92.5mm
Pack Quantity: 4
Board Coverage: 2.88m2
Pack Coverage: 11.52m2
Thermal Conductivity: 0.021W/mK
R-Value: 3.9m2K/W
92.5mm Unilin Safe-R SR/TB-MF is a composite insulated panel of 80mm Phenolic core with a composite foil facing bonded to a 12.5mm tapered edge plasterboard for internal applications, mechanically fixed. Unilin Safe-R SR/TB-MF is designed to provide high levels of thermal insulation and dry lining in one operation for masonry walls. Unilin Safe-R SR/TB-MF incorporates an integral vapour control layer, which helps to reduce the risk of condensation. It can be used as a composite plasterboard for internal walls, sloped roofs and ceilings.
Note: This product was formerly known as 92.5mm Xtratherm Safe-R Thermal Liner SR/TB-MF
CHARACTERISTICS
- Superior performance phenolic foam,
- Low thermal conductivity,
- Effective thermal and fire performance,
- Can be readily cut using a fine toothed saw,
- Rot proof and will remain effective for the life span of the building,
APPLICATION
- Internal wall drylining for new build or refurbishment,
- For internal walls, sloped roofs and ceilings.
INSTALLATION
- Fix a pre-treated timber batten horizontally at ceiling level and another 20mm above the finished floor level.
- Fix vertical battens at max 600mm centres.
- Ensure battens are wide enough to offer 20mm support to all four edges of the plasterboard.
- Pack battens if necessary to level the wall.
- Trim all openings and service penetrations with timber battens.
- Insulation should be cut back to accommodate an adjoining panel at external corners.
- Lift the SR/TB-MF into position using wedges on the floor.
- Screws should be fixed to the timber batten at 150mm centres, at least 12mm in from the board edge.
- The fixings should penetrate at least 25mm into the batten.
- Installation must be in accordance BS 8212:1988.
- Fill any gaps with foam filler.
CERTIFICATION
Unilin Safe-R SR/TB is manufactured to EN ISO 13166 under- Quality Systems approved to EN ISO 9001, Quality Management,
- EN ISO 14001 Environmental Management,
- ISO 45001 Occupational Health and Safety Management System.
Note: Bonding of the Unilin Insulation board with other materials may be made by Unilin or a different fabricator.
Unilin_SR_TB-MF_datasheet.pdf
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 1200mm - 20.16m2
Delivery Time: 3 - 5 days
30mm Unilin FR-BGM is a BBA certified high performance PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. Unilin FR-BGM is suitable to apply torch on felt directly on the insulation. FR..
Guide Price: £280.39
£336.47 inc VAT
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 11.52m2
Delivery Time: 7 - 10 days
75mm Unilin Safe-R 019/MA (Roofs) is a high‑performance phenolic insulation board designed specifically for warm roof applications where exceptional thermal efficiency is required with minimal added build‑up. Its advanced phenolic core delivers one of the lowest thermal conductivities available in r..
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 2.88m2
Delivery Time: 1-3 working days
99mm Unilin Plydeck Flat Roof Board is a high-performance composite board designed for flat roof applications. It comprises a 90mm rigid polyisocyanurate (PIR) insulation board directly bonded to a 9mm OSB board. This combination provides both high levels of thermal insulation and a robust decking s..
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 2.88m2
Delivery Time: 1-3 working days
89mm Unilin Plydeck Flat Roof Board is a high-performance composite board designed for flat roof applications. It comprises a 80mm rigid polyisocyanurate (PIR) insulation board directly bonded to a 9mm OSB board. This combination provides both high levels of thermal insulation and a robust decking s..
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 450mm - 2.16m2
Delivery Time: 2 - 4 days
115mm Unilin Thin-R Plus XT/CF is a superior performance, enhanced polyisocyanurate (PIR) insulation, specifically engineered for full-fill thermal insulation in new external masonry cavity walls. This advanced insulation board is designed to meet and exceed the stringent thermal requirements of Bri..
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 2.88m2
Delivery Time: 1-3 working days
109mm Unilin Plydeck Flat Roof Board is a high-performance composite board designed for flat roof applications. It comprises a 100mm rigid polyisocyanurate (PIR) insulation board directly bonded to a 9mm OSB board. This combination provides both high levels of thermal insulation and a robust decking..