0.5mm Plasticlad Stainless Steel Spacer Washer for PTS Fixings - PL-PTS-WASH-0.5 - pack of 50
0.5mm Plasticlad Stainless Steel Spacer Washer for PTS Fixings - PL-PTS-WASH-0.5 - pack of 50
- Product Code: A1-6771
- Delivery Time: 7 - 10 days
- Brand: Plastestrip (Tech. support: 0172674771)
- Model: PL-PTS-WASH-0.5
Our ratings on 05-01-2026:
4.8 out of 5
Brand: Plastestrip
Model: TUF-S-6x11-A4
Delivery Time: 7 - 10 days
11mm Long Plasticlad Stainless Steel TU Fastener for HPL Panels is a high-performance, blind-fix mechanical anchor designed for the "secret fixing" of High-Pressure Laminate (HPL) and fibre cement cladding panels. These fasteners are installed into the rear of the panel, leaving the front decorative..
Brand: Plastestrip
Model: AL/TP6/50
Delivery Time: 7 - 10 days
50mm PlastiClad Aluminium Birds Beak Trim AL/TP6/50 is a premium external corner profile designed to provide a crisp, architectural finish to cladding installations. Unlike a standard 90º box trim, the "Birds Beak" creates a sharp, pronounced external point, adding a modern geometric detail to the b..
Brand: Plastestrip
Model: AL/ST60
Delivery Time: 7 - 10 days
PlastiClad Aluminium Starter Trim AL/ST60 is the foundational component of any weatherboard installation. It is the very first profile to be installed, ensuring that the first course of cladding planks is set at the correct angle and height. It is fixed horizontally at the lowest point of the i..
Brand: Plastestrip
Model: 862150
Delivery Time: 1-3 working days
50mm Plastestrip Colour Coated Annular Ring Shank Nails for fixing panels to timber. A4 stainless steel (316 grade). Can be powder coated to any colour...
Brand: Plastestrip
Model: AL/610
Delivery Time: 7 - 10 days
PlastiClad Aluminium H style Vertical Joint AL/610 - For Any 10mm Panel is a high-performance connecting profile used to join two cladding panels on a continuous flat run. Its name is derived from its cross-section, which forms a perfect "H" shape, providing two deep, back-to-back channels to receiv..
Brand: Plastestrip
Model: AL/BD/86
Delivery Time: 7 - 10 days
PlastiClad Aluminium Bottom Drip Trim AL/BD/86 is a high-specification base profile designed to provide a secure and weathertight termination for the bottom edge of external façade panels (typically 5mm to 9mm in thickness). It is installed at the lowest point of a cladding run to ensure that rainwa..