Plastestrip T-Rail for Joint Supports - FIX/TEE/HD/100/60 - 3m length
Plastestrip T-Rail for Joint Supports - FIX/TEE/HD/100/60 - 3m length
- Product Code: A1-6798
- Delivery Time: 7 - 10 days
- Brand: Plastestrip (Tech. support: 0172674771)
- Model: FIX/TEE/HD/100/60 - 3m length
Our ratings on 28-08-2026:
4.8 out of 5
Plastestrip T-Rail for Joint Supports - FIX/TEE/HD/100/60 - 3m length
Length: 3000mm
Width: 100mm
Height: 60mm
Thickness: 2mm
Plastestrip T-Rail FIX/TEE/HD/100/60 is a heavy-duty, extruded aluminium profile that forms the backbone of a rainscreen sub-frame. Its distinctive "T" shape is engineered to provide a wide support surface, allowing for the mechanical fixing or structural bonding of two separate cladding panels onto a single rail while maintaining a consistent vertical joint. The T-Rails (and L-Rails) are universal components used across both the FastFrame and ThermaFrame systems.
CHARACTERISTICS
- 100mm face, 60mm leg.
- Made from high specification 6063 T6 grade aluminium.
- Wide fixing face provides ample space for installers to fix the edges of two panels side-by-side while maintaining the required "edge distance" for the fixings.
- The "leg" of the T-Rail clips into the bracket head, allowing for easy adjustment before final fixing.
- T-Rail acts as a primary vertical carrier, transferring the weight of the cladding (the dead load) back to the structural wall via the "Fixed Point" brackets.
- The leg of the T-Rail allows the installer to slide the profile in and out of the bracket making it possible to create a perfectly plumb facade even if the structural substrate is significantly out of level.
FastFrame-Typical-details.pdf
Brand: Plastestrip
Model: FF FIX/BRD/80
Delivery Time: 7 - 10 days
80mm Plastestrip FastFrame Aluminium Double Helping Hand Bracket - FF FIX/BRD/80is the primary load-bearing component within the Plastestrip sub-frame system. While the single bracket is typically used for intermediate wind-load support, the double bracket is engineered to act as the Fixed Point, ca..
Brand: Plastestrip
Model: PVC/100
Delivery Time: 7 - 10 days
100mm Blackout Tape for Aluminium Rails is a high-performance, self-adhesive solution designed to enhance the aesthetic finish of rainscreen cladding systems. By applying this tape directly to the face of aluminium support rails, installers can ensure that the joints between cladding panels remain v..
Brand: Plastestrip
Model: FF FIX/BR/200
Delivery Time: 7 - 10 days
200mm Plastestrip FastFrame Aluminium Single Helping Hand Bracket - FF FIX/BR/200 is the fundamental structural component of the Plastestrip rainscreen support system. It acts as the primary "anchor" between the building's structural substrate (be it masonry, concrete, or steel frame) and the vertic..
Brand: Plastestrip
Model: AL/BD/86
Delivery Time: 7 - 10 days
PlastiClad Aluminium Bottom Drip Trim AL/BD/86 is a high-specification base profile designed to provide a secure and weathertight termination for the bottom edge of external façade panels (typically 5mm to 9mm in thickness). It is installed at the lowest point of a cladding run to ensure that rainwa..
Brand: Plastestrip
Model: AL/ST60
Delivery Time: 7 - 10 days
PlastiClad Aluminium Starter Trim AL/ST60 is the foundational component of any weatherboard installation. It is the very first profile to be installed, ensuring that the first course of cladding planks is set at the correct angle and height. It is fixed horizontally at the lowest point of the i..
Brand: Plastestrip
Model: PL-PTS-11.5
Delivery Time: 7 - 10 days
11.5mm Plasticlad HPL Panel Screw is a high-performance fastening solution specifically engineered for the secure and aesthetic installation of High-Pressure Laminate (HPL) cladding panels. Designed to work seamlessly with timber or metal subframes, these screws are a staple in the UK construction i..