108mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
108mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
- Product Code: A1-1627
- Delivery Time: 2 - 4 days
- Brand: Cellecta (Tech. support: 01634296677)
- Model and Size: 600x2400mm - 1.44m2
- Weight: 20.74kg
Our ratings on 24-10-2025:
4.8 out of 5
108mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
Width: 600mm
Length: 2400mm
Density: 136kg/m3
Weight/m2: 14.7kg
Weight: 20.74kg
Thermal Conductivity: 0.034W/mK
R-Value: 3.18m2K/W
Compressive Strength: 300kPa
108mm Cellecta XCHiP is a high performance insulation board with a 18mm chipboard laminate facing. Cellecta XCHiP combines the benefits of HEXATHERM high performance thermal insulation with a P5 moisture resistant, tongue and groove chipboard to produce a high compressive strength, interlocking floor board.
CHARACTERISTICS
- High compressive strength,
- Interlocking, moisture resistant chipboard facing,
- Excellent life-long thermal performance,
- Quick to install,
- Able to withstand heavy point loads,
- Closed cell structure,
- Suitable for areas in close proximity to water,
- Blown with reclaimed CO2,
- 100% Recyclable,
- Super low U-values achievable
APPLICATION
Cellecta Hexatherm XCHiP is used for basements, above ground bearing concrete floor slabs, and on suspended beam and block floors.
CERTIFICATION
Manufactured in accordance with BS EN 13374 and tested to BS EN 12267
XChip_Suspended_Beam_and_Block_Floor_Thermal_Insulation_Below_Screed.pdf
Brand: Cellecta
Model and Size: 600x1250mm - 3m2
Delivery Time: 2 - 4 days
100mm Cellecta Hexatherm XR is a specially designed closed cell extruded polystyrene board, ideal for for both internal and external wall applications for covering with plaster or render. The board's high comprehensive strength allows it to withstand withstand heavy point loads. The board is complet..
Brand: Cellecta
Model and Size: 600x1250mm - 0.75m2
Delivery Time: 2 - 4 days
160mm Cellecta Hexatherm XDRAiN is a high performance extruded polystyrene inverted thermal roof boards, featuring integrated drainage channels on their underside, which speeds up the shedding of rainwater from the roof, eliminating the need for a separating drainage mat, making them ideal for ..
Brand: Cellecta
Model and Size: 15mm x 30mm - 2.0m
Delivery Time: 3 - 5 days
6mm x 15mm YELOfon FS15 Flanking Strip is a 2m long non cross linked, closed cell polyethylene strip to eliminate perimeter flanking transmission.The acoustic efficiency of the floor will be adversely affected should acoustic bridging between the floating layer and the surrounding structures occur (..
Brand: Cellecta
Model and Size: 5mm x 15mm - 50m
Delivery Time: 3 - 5 days
5mm x 15mm Cellecta Yelofon ES5 Edge Strip is a Perimeter Flanking Isolation, a non cross linked, closed cell polyethylene strip to eliminate perimeter flanking transmission. For use with Screedboard 28 and 30.CHARACTRISTICSExcellent acoustic performance,Very quick and easy installation.APPLICATIONC..
Guide Price
Brand: Cellecta
Model and Size: 600x2400mm - 1.44m2
Delivery Time: 3 - 5 days
Cellecta Deckfon Chip 30T is an overlay treatment designed for conversion and refurbishment projects, especially used when the ceiling is to be replaced and joist are covered with a timber decking. Due to its excellent acoustic performance, it can also be used to reduce impact sound transmission in ..
Guide Price: £32.84
£39.41 inc VAT
Brand: Cellecta
Model and Size: 600x1250mm - 0.75m2
Delivery Time: 2 - 4 days
160mm Cellecta Hexatherm XROOF 300L is an extruded polystyrene thermal insulation board designed specically for inverted roof applications where a high resistance to compression and water absorption is essential. XROOF roof insulation boards are ideal for a multitude of roofing requirements, in..