225mm Ancon 63 Resin/Mechanical Wall Tie - RM63 Remedial Wall Tie - for 61-85mm cavities

225mm Ancon 63 Resin/Mechanical Wall Tie - RM63 Remedial Wall Tie - for 61-85mm cavities
- Product Code: A1-5368
- Delivery Time: 2 - 3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: 225mm
Our ratings on 22-10-2025:

4.8 out of 5
225mm Ancon 63 Resin/Mechanical Wall Tie - RM63 Remedial Wall Tie - for 61-85mm cavities
Length: 225mm
Pack Quantity: 1
Cavity width: 61-85mm
225mm Ancon 63 Resin/Mechanical Wall Tie is a masonry remedial wall tie for use for tying together two leaves of solid walls. This RM63 tie has mechanical expanders at one end and a grooved end at the other end to be fixed to the inner leaf that is perforated, or of low-density or friable material. The resin fixing may be used to eliminate any imposed stress. Requires 11mm Ø holes. These remedial ties are used on older building, where brickwork had been cracked due to corrosion of old ties.
CHARACTERISTICS
- Masonry-to-masonry remedial wall tie,
- Resin/mechanical remedial wall tie,
- For 61-85mm cavities
Brand: Ancon
Model and Size: 350mm
Delivery Time: 3 - 5 days
350mm Ancon Teplo-BF-2 Wall Tie is a smart black general purpose composite wall tie manufactured from pultruded basalt fibres with a thermal conductivity of 0.7 W/mK, which helps to prevent heat escape from the building. The Teplo-BF-2 has specialised moulded safety ends which offer improved buildab..
Guide Price: £3.29
£3.95 inc VAT
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..
Brand: Ancon
Model and Size: Starter tie - pack of 100
Delivery Time: 3 - 5 days
Ancon Staifix Starter Tie with Plug screw-in tie supplied with an 8mm nylon plug for joining new masonry to existing walls without the need for jointing. Ideal for the construction of conservatories, extensions and garden walls ..
Brand: Ancon
Model and Size: 340mm - 7mm
Delivery Time: 3 - 5 days
340mm Ancon Teplo-L-Tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It has stainless steel upstand with a 7mm fixing hole for a second..
Guide Price: £4.08
£4.90 inc VAT
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed..
£23.52
£28.22 inc VAT
Brand: Ancon
Model and Size: SD25/200
Delivery Time: 2 - 5 working days
Ancon SD25/200 Channel Wall Ties with a safety ended v drip for 135-159mm open cavity for Ancon 25/14 channel to be fixed to an outer leaf of brickwork. They are placed in the channel by rotating through 90° and can be easily moved to the required position to be built into the masonry bed joint..