327.5mm Ancon Reveal Support Plate - Stainless Steel
327.5mm Ancon Reveal Support Plate - Stainless Steel
- Product Code: A1-5950
- Delivery Time: 2 - 5 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model: 327.5mm
Our ratings on 07-01-2026:
4.8 out of 5
327.5mm Ancon Reveal Support Plate - Stainless Steel
Length: 327.5mm
327.5mm Ancon Reveal Support Plate is designed to assist in the construction of a brick window reveal. The plate is bonded into the bed joint of the outer leaf to provide a stable bearing onto which the brick reveal is constructed. The long leg of the plate is built into the external leaf of masonry, with the arrow pointing towards the building. To ensure stability, the outer leaf should be built at least one course higher than the reveal bricks at all stages. Reveal plates are only required at the base of reveals; there is no need to install additional plates in the upper courses of brickwork.
BENEFITS
- Provides a stable bearing for the construction of brick reveals.
- Simplifies the process of constructing brick window reveals by ensuring proper alignment.
- Helps maintain the integrity of the outer leaf of masonry by distributing loads effectively.
- Allows for various reveal designs while ensuring consistent performance.
- Minimises the need for additional supports or complex construction techniques.
- Made from stainless steel that enhance the longevity of the brick reveal.
- Reduces the overall construction time and costs associated with building reveals.
Ancon Reveal Support Plates Installation Guide.pdf
Brand: Ancon
Model: 200mm
Delivery Time: 3 - 5 days
200mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..
Brand: Ancon
Model: SD25/100
Delivery Time: 2 - 5 working days
Ancon SD25/100 Channel Wall Ties with a safety ended v drip for 35-59mm open cavity for Ancon 25/14 channel to be fixed to an outer leaf of brickwork. They are placed in the channel by rotating through 90° and can be easily moved to the required position to be built into the masonry bed joint.&..
Brand: Ancon
Model: SD25/275
Delivery Time: 2 - 5 working days
Ancon SD25/275 Channel Wall Ties with a safety ended v drip for 210-234mm open cavity for Ancon 25/14 channel to be fixed to an outer leaf of brickwork. They are placed in the channel by rotating through 90° and can be easily moved to the required position to be built into the masonry bed joint..
Brand: Ancon
Model: 515mm
Delivery Time: 2 - 3 working days
515mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall ..
Brand: Ancon
Model: 225mm
Delivery Time: 2 - 3 working days
225mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed..
£4.80
£5.76 inc VAT
Brand: Ancon
Model: CFS180
Delivery Time: 2 - 5 working days
Ancon CFS180 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used..