37.5mm Unilin Safe-R SR/TB-MF (25mm Phenolic Core and 12.5mm Plasterboard) - Mechanical Fixing (pack of 12)
Guide Price
37.5mm Unilin Safe-R SR/TB-MF (25mm Phenolic Core and 12.5mm Plasterboard) - Mechanical Fixing (pack of 12)
Guide Price: £731.58 (£877.90 inc VAT)
Price per m2: £21.17/m2 (£25.40 inc VAT)
- Product Code: A1-4883
- Delivery Time: 2 - 3 working days
- Brand: Unilin (prev. Xtratherm)
- Model and Size: 2400x1200 - 34.56m2
Our ratings on 17-09-2025:
4.8 out of 5
37.5mm Unilin Safe-R SR/TB-MF (25mm Phenolic Core + 12.5mm Plasterboard) - Mechanical Fixing (pack of 12)
Length: 2400mm
Width: 1200mm
Thickness: 37.5mm
Pack Quantity: 12
Board Coverage: 2.88m2
Pack Coverage: 34.56m2
Thermal Conductivity: 0.023W/mK
R-Value: 1.15m2K/W
37.5mm Unilin Safe-R SR/TB-MF is a composite insulated panel of 25mm Phenolic core with a composite foil facing bonded to a 12.5mm tapered edge plasterboard for internal applications, mechanically fixed. Unilin Safe-R SR/TB-MF is designed to provide high levels of thermal insulation and dry lining in one operation for masonry walls. Unilin Safe-R SR/TB-MF incorporates an integral vapour control layer, which helps to reduce the risk of condensation. It can be used as a composite plasterboard for internal walls, sloped roofs and ceilings.
Note: This product was formerly known as 37.5mm Xtratherm Safe-R Thermal Liner SR/TB-MF
CHARACTERISTICS
- Superior performance phenolic foam,
- Low thermal conductivity,
- Effective thermal and fire performance,
- Can be readily cut using a fine toothed saw,
- Rot proof and will remain effective for the life span of the building,
APPLICATION
- Internal wall drylining for new build or refurbishment,
- For internal walls, sloped roofs and ceilings.
INSTALLATION
- Fix a pre-treated timber batten horizontally at ceiling level and another 20mm above the finished floor level.
- Fix vertical battens at max 600mm centres.
- Ensure battens are wide enough to offer 20mm support to all four edges of the plasterboard.
- Pack battens if necessary to level the wall.
- Trim all openings and service penetrations with timber battens.
- Insulation should be cut back to accommodate an adjoining panel at external corners.
- Lift the SR/TB-MF into position using wedges on the floor.
- Screws should be fixed to the timber batten at 150mm centres, at least 12mm in from the board edge.
- The fixings should penetrate at least 25mm into the batten.
- Installation must be in accordance BS 8212:1988.
- Fill any gaps with foam filler.
CERTIFICATION
Unilin Safe-R SR/TB is manufactured to EN ISO 13166 under - Quality Systems approved to EN ISO 9001, Quality Management,
- EN ISO 14001 Environmental Management,
- ISO 45001 Occupational Health and Safety Management System.
Note: Bonding of the Unilin Insulation board with other materials may be made by Unilin or a different fabricator.
Unilin_SR_TB-MF_datasheet.pdf
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200x450mm - 3.78m2
Delivery Time: 2 - 4 days
60mm Unilin ThinR XT/CW Partial Fill Cavity Wall Insulation Board is a PIR insulation board with a high thermal performance whilst maintaining a residual cavity in the external walls. This board achieves high standards of insulation with a certified thermal conductivity of 0.022W/mK with the optiona..
Guide Price: £49.52
£59.42 inc VAT
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200x2400mm - 5.76m2
Delivery Time: 1-3 working days
150mm Unilin Thin-R Hyfloor XT/HYF is a high performance floor Insulation board with superior thickness to performance ratio allowing the lower targets required under the new Building Regulations to be achieved with minimum thicknesses. Unilin Thin-R Hyfloor XT/HYF is a high performance foil faced P..
Brand: Unilin (prev. Xtratherm)
Model and Size: 2400x1200mm - 8.64m2
Delivery Time: 1-3 working days
120mm Unilin Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Unilin Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Unilin Thin-R F..
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200x450mm - 2.16m2
Delivery Time: 1-3 working days
100mm Unilin ECO360/CW Partial Fill Cavity Wall board has a core of modified polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings offering excellent insulation performance with thermal conductivity. Unilin ECO360 CW board reduces the junctions prone to thermal b..
Brand: Unilin (prev. Xtratherm)
Model and Size: 1250x600mm - 10.5m2
Delivery Time: 2 - 3 working days
30mm Unilin XPS 300 is an extremely durable heavy duty thermal insulation board made of extruded polystyrene offering exceptional thermal performance and versatility. It is a lightweight board that is able to withstand extreme loads. It has a rebated edge.CHARACTERISTICSExtremely strong,Compressive ..
Brand: Unilin (prev. Xtratherm)
Model and Size: 2400x1200mm - 34.56m2
Delivery Time: 1-3 working days
25mm Unilin Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Unilin Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Unilin Thin-R FR..