4.2x13mm Wafer Head Screw with Drill Point for Thinner Gauge Steel - box of 1000
4.2x13mm Wafer Head Screw with Drill Point for Thinner Gauge Steel - box of 1000
- Product Code: A1-3289
- Delivery Time: 1 - 2 days
- Brand: Various Manufacturers
- Model: 4.2x13mm - for thinner gauge steel
- Weight: 1.00kg
Our ratings on 09-10-2026:
4.8 out of 5
Brand: Various Manufacturers
Model: Code 4 - 2400mm x 50mm - 0.12m2
Delivery Time: 3 - 5 days
1.80mm Code 4 Lead Lining Joint Strips are used to ensure continuous radiation shielding at the joints where lead-lined panels meet. They prevent radiation leakage by covering the gaps and seams between lead-lined plasterboard, plywood, or MDF panels. These strips are crucial in environments requiri..
Brand: Various Manufacturers
Model: 1200mm x 2400mm - 2.88m2
Delivery Time: 2 - 5 working days
42.5mm Acoustic and Thermal Wall Panel is a 30mm rigid high density thermal and acoustic Rockwool insulation slab bonded to 12.5mm soundproof plasterboard (A2), which would not only reduce sound transmission through walls, but also give you fire safety. The Rockwool slab is made from volcanic rock, ..
Brand: Various Manufacturers
Model: 310ml mastic sealant
Delivery Time: 1 - 2 days
Acoustic and Intumescent Mastic is a sealing and fire stopping product intended for penetration services and linear joint and gap seals. It is produced from acrylic emulsion mineral fillers of high density. The product is classified as non-hazardous and non-toxic, chemically stable and it is not rea..
£3.15
£3.78 inc VAT
Brand: Various Manufacturers
Model: 1200mm x 2400mm - 2.88m2
Delivery Time: 4 - 7 days
93mm Structural Insulated Panel (SIP) comprises a 75mm thick core of rigid Phenolic Core sandwiched between two 9mm thick Oriented Strand Board (OSB) sheets. It is an advanced building component designed for high-performance and energy-efficient construction. This sandwich panel ensures superior str..
Brand: Various Manufacturers
Model: Standard Plasterboard Strips
Delivery Time: 2 - 5 working days
Cut to Size Standard Plasterboard Strips for Deflection Heads are used in plasterboard partitions to allow for movement - up, down or both within the structure at the head of a partition. This deflection is created by live and dead loads on the floor or roof above. The partition below has to accommo..
Brand: Various Manufacturers
Model: 3.5x35mm - coarse point
Delivery Time: 1 - 2 days
3.5x35mm Coarse Thread Sharp Point high quality screws have been specially developed for fixing plasterboard on to timber frameworks of differing thicknesses, to be used for both wall and ceiling applications in interior and exterior applications. Screw directly into timber, no pre drilling required..
£13.30
£15.96 inc VAT