British Gypsum Thistle Dri-Coat Cement-based Renovating Plaster- 25kg - pallet of 40

Guide Price
British Gypsum Thistle Dri-Coat Cement-based Renovating Plaster- 25kg - pallet of 40
Guide Price: £1,078.31 (£1,293.97 inc VAT)
- Product Code: A1-1892
- Delivery Time: 2 - 3 weeks
- Brand: British Gypsum (Tech. support: 01159456123)
- Model and Size: 1000kg - pallet of 40
- Weight: 999.99kg
Our ratings on 27-06-2025:

4.8 out of 5
British Gypsum Thistle Dri-Coat Cement-based Renovating Plaster- 25kg - pallet of 40
Weight: 999.99kg
Thistle Dri-Coat is a cement based renovating plaster created for re-plastering walls after an installation of a new damp proof course (DPC). Walls which have had a defective damp proof course or none at all are likely to contain hygroscopic salts, which can continue to be a source of dampness, even after rising dampness is prevented, because they absorb atmospheric moisture. Thistle Dri-Coat is cement based with waterproofing additives, which restrict the migration of these salts from the background through the plaster and thereby limit their detrimental effect on internal decoration.
- Special waterproofing additives
- Prevents the detrimental effect of atmospheric moisture
Over a new damp proof course
INSTALLATION
- The source of the rising dampness must be identified and eliminated.
- The existing plaster should be hacked off at least 0.5m above the detectable sign of dampness.
- The wall surface should be thoroughly raked out and the brickwork brushed with a wire brush.
- Before applying Thistle Dri-Coat, let the surface be dried out.
- Mix Thistle Dri-Coat with clean water.
- Low suction or smooth backgrounds should be treated with a water resisting bonding aid.
- Initial curing and shrinkage of the undercoat must be allowed prior to application of finish plaster. In good drying conditions, a minimum delay of 24 hours is required.
- Finish using Thistle Board Finish.
- Thistle plasters can be decorated with most paint finishes and wall coverings.
- Tiles up to 20kg/m2 can be applied directly to Thistle plaster.
- ISO 9001:2008 Quality Management System,
- ISO 14001:2004 Environmental Management System,
- BES 6001:Issue 2 Responsible Sourcing of Construction Products,
- BS OHSAS 18001:2007 Occupational Health and Safety Management
Brand: British Gypsum
Model and Size: 25kg
Delivery Time: Out Of Stock
Thistle Spray Finish is a gypsum finish plaster designed for application by worm pump type plastering machines (mono pump machines). It may also be applied by hand. It provides a smooth, inert, high quality surface to internal walls and ceilings, and a durable base for the application of decorative ..
£625.46
£750.55 inc VAT
Brand: British Gypsum
Model and Size: 48 S 50 'C' Stud - 2.4 m
Delivery Time: 3 - 5 days
British Gypsum Gypframe 48 S 50 2.4 m 'C' studs are especially designed for smooth board alignment and increased strength. Their spaced structural apertures make the services routing much easier and their diversity makes them applicable to different height, strength, acoustic insulation a..
£5.55
£6.66 inc VAT
Brand: British Gypsum
Model and Size: MF10 - 2.8m
Delivery Time: 3 - 5 days
British Gypsum Gyplyner MF10 2.8m Channel is one of the GypLyner UNIVERSAL channels with very wide application, designed to ease the plasterboard lining installation process onto timber joists, concrete soffits, masonry walls, as well as for steel beams and columns encasement.The product can be used..
£72.77
£87.32 inc VAT
Brand: British Gypsum
Model and Size: 1200x3000mm - 3.60m2
Delivery Time: 2 - 3 working days
12.5mm Gyproc FireLine MR with water repellent additives in its core is used in British Gypsum wall lining and partition systems where both fire protection and moisture resistance are required. Also used for protection to structural steel. Plasterboard linings provide good fire p..
Guide Price: £26.36
£31.63 inc VAT
Brand: British Gypsum
Model and Size: GFS1 - 2.4 m
Delivery Time: 2 - 4 days
British Gypsum Gypframe GFS1 Fixing Strap is one of the Gypframe board joining components designed to provide support to horizontal plasterboard joints, within deflection heads, in case the wall is higher than one board. The product can be used in various systems including:FireWall provides up to 24..
£7.17
£8.60 inc VAT
Brand: British Gypsum
Model and Size: 2000x1200mm - 2.40m2
Delivery Time: 1 - 2 days
20mm Glassroc F Firecase is a highly versatile, Class 0, non-combustible glass reinforced gypsum board. The non-combustibility of gypsum and the reinforcement of glass fibre combine to produce a strong and resilient product, which has resistance to sag and offers excellent fire protection. It consis..
Guide Price: £70.21
£84.25 inc VAT