Ceresit PU Profi Foam Cleaner
sale!
Ceresit PU Profi Foam Cleaner
Price: £10.59 (£12.71 inc VAT)
£10.06 (£12.07 inc VAT)
5 or more £9.50 (£11.40 inc VAT)
10 or more £9.38 (£11.26 inc VAT)
15 or more £8.55 (£10.26 inc VAT)
- Product Code: A1-668
- Delivery Time: 5 - 7 days
- Brand: Ceresit
- Model and Size: Ceresit PU
- Weight: 0.50kg
Our ratings on 25-04-2024:
4.6 out of 5 - Excellent
4.8 out of 5
Ceresit PU Profi Foam Cleaner
Ceresit Profi cleaner is used for removing fresh foam spots and cleaning the applicator.
Cleaning of the applicator is necessary if:
- difficulties have been experienced while using a gun
- gun has not been used for more than 1 month
- after removing the can from the gun without replacing it with a new can
Brand: Ceresit
Model and Size: CT87
Delivery Time: In Stock 1-2 working days
Ceresit CT87 mortar is designed to insulate external walls of the buildings by application of external thermal insulation composite system using EPS- or mineral wool facade boards. It is an element of following ETICS from Ceresit Ceretherm Premium, Express and Wool Premium. CT 87 mortar is used for ..
£27.20
£32.64 inc VAT
Brand: Ceresit
Model and Size: CT74 - 25kg
Delivery Time: 5 - 7 days
1.5mm grain Ceresit CT79 Impactum is a tough stone like decorative elastomeric render for indoor and outdoor applications, where high damage and operating resistance is required. This render is specially recommended for applications on partitions where high damage and operating resistance is require..
Guide Price: £84.09
£100.91 inc VAT
sale!
Brand: Ceresit
Model and Size: CR65
Delivery Time: 2 - 3 working days
Ceresit CR65 is a high water impermeable tanking slurry, which permits diffusion, but is frost resistant, and suitable for drinking water tanks. Used on the horizontal and vertical surfaces of buildings, structural components and tanks, for waterproofing against water loads, for waterproofing m..
£28.48
£34.18 inc VAT
sale!
Brand: Ceresit
Model and Size: CT84
Delivery Time: In Stock 1-2 working days
Ceresit CT84 Express is a one-component low expansion polyurethane adhesive for fixing an External Wall Insulation boards (Phenolic, PIR, Expanded Polystyrene) and also plasterboards in drylining. Approximately 2 hours after application, the insulation boards may be smoothed, anchored and, then the ..
£12.19
£14.63 inc VAT
Guide Price
Brand: Ceresit
Model and Size: 25kg - 0.5 mm grain
Delivery Time: 1-3 working days
Ceresit CT60 is used for making thin-layer renders in External Wall Insulation Systems, on concrete substrates, on traditional renders, gypsum substrates and chipboards, gypsum cardboards, etc. It is recommended use CT 60 as facade render within Ceresit ETICS (External Thermal Insulation Composite S..
Guide Price
Brand: Ceresit
Model and Size: CT80 - 25kg
Delivery Time: 7 - 10 days
Ceresit CT80 is an adhesive mortar for fastening EWI mineral wool slabs, polystyrene and phenolic boards and also for making a thin layer of base coat render reinforced with fibreglass mesh on the insulation in Insulated Renders Systems. Ceresit CT80 has very good adhesion to load-bearing, dense and..
Guide Price: £15.20
£18.24 inc VAT