PlastiClad Aluminium Starter Trim AL/ST40 for Click-in Cladding Systems - 3055mm Length
PlastiClad Aluminium Starter Trim AL/ST40 for Click-in Cladding Systems - 3055mm Length
- Product Code: A1-6761
- Delivery Time: 7 - 10 days
- Brand: Plastestrip (Tech. support: 0172674771)
- Model: AL/ST40
Our ratings on 14-10-2026:
4.8 out of 5
PlastiClad Aluminium Starter Trim AL/ST40 for Click-in Cladding Systems - 3055mm Length
Length: 3055mm
Thickness: 1.1mm
PlastiClad Aluminium Starter Trim AL/ST40 is a high-specification base profile designed to initiate the installation of interlocking cladding panels. This profile features a specific "click-lock" geometry that mirrors the engagement mechanism of the cladding panels, ensuring a secure and perfectly level starting point for the entire façade.
This trim is extruded from high-grade aluminium and is distinguished by the manufacturer’s rigorous finishing process:
- Made from 6063 T6 Aluminium.
- Unlike many standard trims on the market, Plasticlad ensures a high quality and durable finish by applying a polyester powder coating to all its aluminium profiles and fixings. This process provides a tougher, longer-lasting surface than standard paint or anodising, offering exceptional resistance to scratching, fading, and chemical degradation.
- The profile is designed with a specific hook or groove detail that allows the first cladding panel to "click" or "snap" into place. This ensures a mechanical bond that is far more secure than simply resting a board on a ledge.
- Available in 28 RAL colours.
- All stock powders are 80 – 85% gloss value also known as full gloss.
Plastestrip-Aluminium-6063-2-data-sheet.pdf
Brand: Plastestrip
Model: AL/68
Delivery Time: 7 - 10 days
PlastiClad Aluminium H style Vertical Joint AL/68 - For Any 8mm Panel is a high-performance connecting profile used to join two cladding panels on a continuous flat run. Its name is derived from its cross-section, which forms a perfect "H" shape, providing two deep, back-to-back channels to receive ..
Brand: Plastestrip
Model: AL/VENT/30/100
Delivery Time: 7 - 10 days
PlastiClad Aluminium Vent Trim to Close up to 100mm Cavity AL/VENT/30/100 is a precision-punched architectural trim designed to maintain a continuous air path behind cladding panels while simultaneously acting as a physical barrier against pests. These profiles are typically installed at the base of..
Brand: Plastestrip
Model: PL-PTS-WASH-0.9
Delivery Time: 7 - 10 days
0.9mm Plasticlad Stainless Steel Spacer Washer is a premium component designed for use with PTS fixings in rainscreen cladding systems. These washers are specifically designed to create a defined gap between the cladding panel and the supporting subframe (whether timber or metal).CHARACTERISTICSManu..
Brand: Plastestrip
Model: AL/EF10
Delivery Time: 7 - 10 days
Plasticlad Aluminium F Style External or Internal Corner AL/EF10 is a specific, durable trim profile designed for finishing cladding installations where two panels meet at an outward-facing angle. It is a highly robust solution, often chosen for its clean finish and defined structure. This trim is e..
Brand: Plastestrip
Model: FIX/ANG/HD/60/40 - 6m length
Delivery Time: 7 - 10 days
Plastestrip L-Rail is a high-strength, extruded aluminium profile used as a vertical support member in rainscreen cladding sub-frames. Its primary function is to provide additional points of contact behind a cladding panel, ensuring the facade remains rigid and resistant to wind pressure without the..
Brand: Plastestrip
Model: FF FIX/BRD/80
Delivery Time: 7 - 10 days
80mm Plastestrip FastFrame Aluminium Double Helping Hand Bracket - FF FIX/BRD/80is the primary load-bearing component within the Plastestrip sub-frame system. While the single bracket is typically used for intermediate wind-load support, the double bracket is engineered to act as the Fixed Point, ca..
Related Products
Brand: Plastestrip
Model: AL/VENT/30/40
Delivery Time: 7 - 10 days
PlastiClad Aluminium Vent Trim to Close 30-40mm Cavity AL/VENT/30/40 is a precision-punched architectural trim designed to maintain a continuous air p..