PlastiClad Aluminium Starter Trim AL/ST60 for Weatherboard Systems - 3000mm Length
PlastiClad Aluminium Starter Trim AL/ST60 for Weatherboard Systems - 3000mm Length
- Product Code: A1-6744
- Delivery Time: 7 - 10 days
- Brand: Plastestrip (Tech. support: 0172674771)
- Model: AL/ST60
Our ratings on 05-01-2026:
4.8 out of 5
PlastiClad Aluminium Starter Trim AL/ST60 for Weatherboard Systems - 3000mm Length
Length: 3000mm
Thickness: 1mm
PlastiClad Aluminium Starter Trim AL/ST60 is the foundational component of any weatherboard installation. It is the very first profile to be installed, ensuring that the first course of cladding planks is set at the correct angle and height. It is fixed horizontally at the lowest point of the installation area—typically above the damp proof course (DPC)—to provide the necessary "kick-out" angle for the first weatherboard plank.
This trim is extruded from high-grade aluminium and is distinguished by the manufacturer’s rigorous finishing process:
- Made from 1050 Aluminium.
- Unlike many standard trims on the market, Plasticlad ensures a high quality and durable finish by applying a polyester powder coating to all its aluminium profiles and fixings. This process provides a tougher, longer-lasting surface than standard paint or anodising, offering exceptional resistance to scratching, fading, and chemical degradation.
- The profile is specifically shaped with an integrated riser that mimics the lap of a board. This ensures that the first plank sits at the exact same angle as all subsequent boards, maintaining a consistent shadow line across the entire façade.
- Available in 28 RAL colours.
- All stock powders are 80 – 85% gloss value also known as full gloss.
plastestrip-Aluminium-1050-1-data-sheet.pdf
Brand: Plastestrip
Model: AL/VENT/50/70
Delivery Time: 7 - 10 days
PlastiClad Aluminium Vent Trim to Close 50-70mm Cavity AL/VENT/50/70 is a precision-punched architectural trim designed to maintain a continuous air path behind cladding panels while simultaneously acting as a physical barrier against pests. These profiles are typically installed at the base of..
Brand: Plastestrip
Model: AL/TP25
Delivery Time: 7 - 10 days
PlastiClad Aluminium Vertical Joint AL/TP25 is a high-performance H-profile trim specifically designed for lapped weatherboard cladding systems. It provides a structured, weathertight, and aesthetically pleasing solution for joining two runs of weatherboard planks end-to-end on a continuous flat wal..
Brand: Plastestrip
Model: RP9
Delivery Time: 2 - 5 working days
Plastestrip stainless steel small head timer fixing screw for fixing panels to timber, 35mm long, 9mm head. A4 stainless steel (316 grade). Can be powder coated to any colour. ..
£42.50
£51.00 inc VAT
Brand: Plastestrip
Model: AL/VENT/30/40
Delivery Time: 7 - 10 days
PlastiClad Aluminium Vent Trim to Close 30-40mm Cavity AL/VENT/30/40 is a precision-punched architectural trim designed to maintain a continuous air path behind cladding panels while simultaneously acting as a physical barrier against pests. These profiles are typically installed at the base of..
Brand: Plastestrip
Model: 555-020-823
Delivery Time: 7 - 10 days
Undercut Anchor for 8.5mm Embedment is a specialised mechanical fixing designed for the high-end "secret fix" installation of thin cladding panels, typically High-Pressure Laminate (HPL), ceramic, or natural stone. The undercut anchor relies on a precise "undercut" geometry drilled into the rear of ..
Brand: Plastestrip
Model: PL-PTS-WASH-1.6
Delivery Time: 7 - 10 days
1.6mm Plasticlad Stainless Steel Spacer Washer is a premium component designed for use with PTS fixings in rainscreen cladding systems. These washers are specifically designed to create a defined gap between the cladding panel and the supporting subframe (whether timber or metal).CHARACTERISTICSManu..
Related Products
Guide Price
Brand: Etex Exteriors
Model: 190x3600 - 0.68m2
Delivery Time: 5 - 7 days
Cedral Lap is an attractive, fibre cement cladding board which is an ideal low maintenance, rot free alternative to all types of traditional cladding,..
Guide Price: £20.89
£25.07 inc VAT
Guide Price
Brand: Etex Exteriors
Model: 190x3600 - 0.68m2
Delivery Time: 5 - 7 days
Cedral Lap Woodstain Finish is an attractive, fibre cement cladding board which is an ideal low maintenance, rot free alternative to all types of trad..
Guide Price: £33.47
£40.16 inc VAT
Brand: James Hardie
Model: 8mm x 180mm x 3600mm - Smooth
Delivery Time: 3 - 7 days
Hardie Plank - Fibre Cement Cladding- Smooth Texture is a versatile, low maintenance fibre cement weatherboard with a natural beautiful texture to pro..
Brand: James Hardie
Model: 8mm x 180mm x 3600mm - Cedar Texture
Delivery Time: 3 - 7 days
Hardie Plank - Fibre Cement Cladding - Cedar Texture is a versatile, low maintenance fibre cement weatherboard with a natural beautiful texture to pro..
Brand: RCM
Model: 7.5mm x 190mm x 3660mm
Delivery Time: 1-3 working days
Supertech Weatherboard is a cutting-edge, fully ventilated rainscreen cladding system that seamlessly combines aesthetic appeal with high-performance ..
Brand: Plastestrip
Model: AL/VENT/30/40
Delivery Time: 7 - 10 days
PlastiClad Aluminium Vent Trim to Close 30-40mm Cavity AL/VENT/30/40 is a precision-punched architectural trim designed to maintain a continuous ..