PlastiClad Aluminium Vent Trim to Close 30-40mm Cavity AL/VENT/30/40 - for Weatherboard Systems - 3000mm Length
PlastiClad Aluminium Vent Trim to Close 30-40mm Cavity AL/VENT/30/40 - for Weatherboard Systems - 3000mm Length
- Product Code: A1-6745
- Delivery Time: 7 - 10 days
- Brand: Plastestrip (Tech. support: 0172674771)
- Model: AL/VENT/30/40
Our ratings on 27-01-2026:
4.8 out of 5
PlastiClad Aluminium Vent Trim to Close 30-40mm Cavity AL/VENT/30/40 - for Weatherboard Systems - 3000mm Length
Length: 3000mm
Thickness: 0.75mm
Cavity width: 30-40mm
PlastiClad Aluminium Vent Trim to Close 30-40mm Cavity AL/VENT/30/40 is a precision-punched architectural trim designed to maintain a continuous air path behind cladding panels while simultaneously acting as a physical barrier against pests. These profiles are typically installed at the base of the wall (the intake) and at the top of the wall or above windows (the exhaust) to ensure a healthy, ventilated cavity.
This trim is extruded from high-grade aluminium and is distinguished by the manufacturer’s rigorous finishing process:
- Made from 1050 Aluminium.
- Unlike many standard trims on the market, Plasticlad ensures a high quality and durable finish by applying a polyester powder coating to all its aluminium profiles and fixings. This process provides a tougher, longer-lasting surface than standard paint or anodising, offering exceptional resistance to scratching, fading, and chemical degradation.
- The profile features a consistent pattern of small, punched holes. This "perforated" design is engineered to provide a specific free-air area, ensuring the building meets UK Building Regulations for cavity ventilation.
- Available in 28 RAL colours.
- All stock powders are 80 – 85% gloss value also known as full gloss.
plastestrip-Aluminium-1050-1-data-sheet.pdf
Brand: Plastestrip
Model: AL/99/25
Delivery Time: 7 - 10 days
PlastiClad Aluminium Bay Corner AL/99/25 is a specialist extruded trim designed specifically to resolve complex angles in lapped weatherboard cladding systems, most commonly found at the corners of bay windows where the angle is 135º. The Bay Corner features stepped recesses or channels on both side..
Brand: Plastestrip
Model: PL-PTS-WASH-0.9
Delivery Time: 7 - 10 days
0.9mm Plasticlad Stainless Steel Spacer Washer is a premium component designed for use with PTS fixings in rainscreen cladding systems. These washers are specifically designed to create a defined gap between the cladding panel and the supporting subframe (whether timber or metal).CHARACTERISTICSManu..
Brand: Plastestrip
Model: FF FIX/BRD/100
Delivery Time: 7 - 10 days
100mm Plastestrip FastFrame Aluminium Double Helping Hand Bracket - FF FIX/BRD/100 is the primary load-bearing component within the Plastestrip sub-frame system. While the single bracket is typically used for intermediate wind-load support, the double bracket is engineered to act as the Fixed P..
Brand: Plastestrip
Model: AL/ST40
Delivery Time: 7 - 10 days
PlastiClad Aluminium Starter Trim AL/ST40 is a high-specification base profile designed to initiate the installation of interlocking cladding panels. This profile features a specific "click-lock" geometry that mirrors the engagement mechanism of the cladding panels, ensuring a secure and perfec..
Brand: Plastestrip
Model: AL/715
Delivery Time: 7 - 10 days
PlastiClad Aluminium Edge Trim AL/715 for Single Panels is a high-precision architectural profile designed to provide a neat, protective termination for individual cladding sheets. This trim is engineered specifically to house the edge of a single, flat panel (such as a large-format composite s..
Brand: Plastestrip
Model: FF FIX/BR/340
Delivery Time: 7 - 10 days
340mm Plastestrip FastFrame Aluminium Single Helping Hand Bracket - FF FIX/BR/340 is the fundamental structural component of the Plastestrip rainscreen support system. It acts as the primary "anchor" between the building's structural substrate (be it masonry, concrete, or steel frame) and the vertic..
Related Products
Guide Price
Brand: Etex Exteriors
Model: 190x3600 - 0.68m2
Delivery Time: 5 - 7 days
Cedral Lap is an attractive, fibre cement cladding board which is an ideal low maintenance, rot free alternative to all types of traditional cladding,..
Guide Price: £20.89
£25.07 inc VAT
Guide Price
Brand: Etex Exteriors
Model: 190x3600 - 0.68m2
Delivery Time: 5 - 7 days
Cedral Lap Woodstain Finish is an attractive, fibre cement cladding board which is an ideal low maintenance, rot free alternative to all types of trad..
Guide Price: £33.47
£40.16 inc VAT
Brand: James Hardie
Model: 8mm x 180mm x 3600mm - Smooth
Delivery Time: 3 - 7 days
Hardie Plank - Fibre Cement Cladding- Smooth Texture is a versatile, low maintenance fibre cement weatherboard with a natural beautiful texture to pro..
Brand: James Hardie
Model: 8mm x 180mm x 3600mm - Cedar Texture
Delivery Time: 3 - 7 days
Hardie Plank - Fibre Cement Cladding - Cedar Texture is a versatile, low maintenance fibre cement weatherboard with a natural beautiful texture to pro..
Brand: RCM
Model: 7.5mm x 190mm x 3660mm
Delivery Time: 1-3 working days
Supertech Weatherboard is a cutting-edge, fully ventilated rainscreen cladding system that seamlessly combines aesthetic appeal with high-performance ..
Brand: Plastestrip
Model: AL/ST60
Delivery Time: 7 - 10 days
PlastiClad Aluminium Starter Trim AL/ST60 is the foundational component of any weatherboard installation. It is the very first profile to be inst..
Brand: Plastestrip
Model: AL/ST40
Delivery Time: 7 - 10 days
PlastiClad Aluminium Starter Trim AL/ST40 is a high-specification base profile designed to initiate the installation of interlocking cladding pan..