PlastiClad Aluminium Vent Trim to Close up to 120mm Cavity AL/VENT/30/120 - for Weatherboard Systems - 3000mm Length
PlastiClad Aluminium Vent Trim to Close up to 120mm Cavity AL/VENT/30/120 - for Weatherboard Systems - 3000mm Length
- Product Code: A1-6749
- Delivery Time: 7 - 10 days
- Brand: Plastestrip (Tech. support: 0172674771)
- Model: AL/VENT/30/120
Our ratings on 24-07-2026:
4.8 out of 5
PlastiClad Aluminium Vent Trim to Close up to 120mm Cavity AL/VENT/30/120 - for Weatherboard Systems - 3000mm Length
Length: 3000mm
Thickness: 0.75mm
Cavity width: up to 120mm
PlastiClad Aluminium Vent Trim to Close up to 120mm Cavity AL/VENT/30/120 is a precision-punched architectural trim designed to maintain a continuous air path behind cladding panels while simultaneously acting as a physical barrier against pests. These profiles are typically installed at the base of the wall (the intake) and at the top of the wall or above windows (the exhaust) to ensure a healthy, ventilated cavity.
This trim is extruded from high-grade aluminium and is distinguished by the manufacturer’s rigorous finishing process:
- Made from 1050 Aluminium.
- Unlike many standard trims on the market, Plasticlad ensures a high quality and durable finish by applying a polyester powder coating to all its aluminium profiles and fixings. This process provides a tougher, longer-lasting surface than standard paint or anodising, offering exceptional resistance to scratching, fading, and chemical degradation.
- The profile features a consistent pattern of small, punched holes. This "perforated" design is engineered to provide a specific free-air area, ensuring the building meets UK Building Regulations for cavity ventilation.
- Available in 28 RAL colours.
- All stock powders are 80 – 85% gloss value also known as full gloss.
plastestrip-Aluminium-1050-1-data-sheet.pdf
Brand: Plastestrip
Model: TU-S-6x11-A4
Delivery Time: 7 - 10 days
11mm Long Plasticlad Stainless Steel TU Fastener for Rockpanel Xtreme is a high-performance, blind-fix mechanical anchor designed for the "secret fixing" of Rockpanel Xtreme and fibre cement cladding panels. These fasteners are installed into the rear of the panel, leaving the front decorative ..
Brand: Plastestrip
Model: ST/CH/30/210 - 3m length
Delivery Time: 7 - 10 days
Plastestrip Galvanised Steel C-Channel - ST/CH/30/210 is a robust, open-faced profile designed to provide a flat, recessed mounting track for the brackets. These horizontal support profiles act as a structural "bridge" between building studs. By installing these horizontally across the face of the s..
Brand: Plastestrip
Model: AL/710
Delivery Time: 7 - 10 days
PlastiClad Aluminium J Style Edge Trim AL/710 - For Any 10mm Panel is a multifunctional finishing profile designed to provide a crisp, clean termination for cladding panels. It is typically used where a cladding run ends—such as against a door frame, a window reveal, or when transitioning to a diffe..
Brand: Plastestrip
Model: FF FIX/BRD/280
Delivery Time: 7 - 10 days
280mm Plastestrip FastFrame Aluminium Double Helping Hand Bracket - FF FIX/BRD/280 is the primary load-bearing component within the Plastestrip sub-frame system. While the single bracket is typically used for intermediate wind-load support, the double bracket is engineered to act as the Fixed P..
Brand: Plastestrip
Model: AL/VENT/30/50
Delivery Time: 7 - 10 days
PlastiClad Aluminium Vent Trim to Close 30-50mm Cavity AL/VENT/30/50 is a precision-punched architectural trim designed to maintain a continuous air path behind cladding panels while simultaneously acting as a physical barrier against pests. These profiles are typically installed at the base of..
Brand: Plastestrip
Model: AL/125
Delivery Time: 7 - 10 days
PlastiClad Symmetric Aluminium External Corner AL/125 is a crucial, high-grade trim specifically designed for the installation of lapped weatherboard cladding systems such as fibre cement or composite planking. Its primary function is to provide a clean, weathertight, and robust finish where th..
Related Products
Guide Price
Brand: Etex Exteriors
Model: 190x3600 - 0.68m2
Delivery Time: 5 - 7 days
Cedral Lap is an attractive, fibre cement cladding board which is an ideal low maintenance, rot free alternative to all types of traditional cladding,..
Guide Price: £20.89
£25.07 inc VAT
Guide Price
Brand: Etex Exteriors
Model: 190x3600 - 0.68m2
Delivery Time: 5 - 7 days
Cedral Lap Woodstain Finish is an attractive, fibre cement cladding board which is an ideal low maintenance, rot free alternative to all types of..
Guide Price: £33.47
£40.16 inc VAT
Brand: James Hardie
Model: 8mm x 180mm x 3600mm - Smooth
Delivery Time: 3 - 7 days
Hardie Plank - Fibre Cement Cladding- Smooth Texture is a versatile, low maintenance fibre cement weatherboard with a natural beautiful texture to pro..
Brand: James Hardie
Model: 8mm x 180mm x 3600mm - Cedar Texture
Delivery Time: 3 - 7 days
Hardie Plank - Fibre Cement Cladding - Cedar Texture is a versatile, low maintenance fibre cement weatherboard with a natural beautiful texture to pro..
Brand: RCM
Model: 7.5mm x 190mm x 3660mm
Delivery Time: 1-3 working days
Supertech Weatherboard is a cutting-edge, fully ventilated rainscreen cladding system that seamlessly combines aesthetic appeal with high-performance ..
Brand: Plastestrip
Model: AL/ST60
Delivery Time: 7 - 10 days
PlastiClad Aluminium Starter Trim AL/ST60 is the foundational component of any weatherboard installation. It is the very first profile to be inst..
Brand: Plastestrip
Model: AL/ST40
Delivery Time: 7 - 10 days
PlastiClad Aluminium Starter Trim AL/ST40 is a high-specification base profile designed to initiate the installation of interlocking cladding pan..