240mm Aluminium System Starter Track Profile for Curved Walls - length 2.5m.

The WEC 732 profile has an increased drip section to improve visual appearance and a large front face to help prevent water blowing up and soaking the insulation. The new design of drip also allows the end caps to be riveted into position. Manufactured from 1.2mm pre-coated white aluminium, in lengt..

9mm Frameseal Bead with Protecting Lip and Mesh length of 2.6m, article 37929 for plaster thickness 9mm. Made with Rigid PVC with soft PVC and glass fibre mesh...

The WEC 791 profile has an up-stand that can be pushed under a barge board. This reduces the need for a mastic seal and removes future maintenance issues. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soak..

120mm WEC End Cap for Verge Trim Profiles can be used with; WEC 771, WEC 781, WEC 791 AND IGT range of profiles. Manufactured in 1.2mm pre-coated white aluminium...

70mm Perforated Full System Base Bead Profile made from powder coated galvanised steel with PVC nosing which will provide additional protection against abrasion and corrosion. This product can also be used as a window/door head profile. External and Internal Corners and additional sizes made to orde..

2m Aluminium Rail System Support Track profile to be used in an External Thermal Insulation Systems with EPS. Can be used with other stiff insulation boards.INSTALLATIONFix the starter track of the rail system to the wall with dowel screws to the substrate. Dowels should be installed at a max. spaci..