110mm Aluminium Stop Track Profile for thermal insulation systems with render, designed for 100mm thickness of insulating board. These profiles can be powder coated to any standard RAL colour...

70mm WEC 771 Verge Trim Profile is designed for use in situations where sealing the rear of the profile is possible. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soaking the insulation.Manufactured in 1.2..

Aluminium Facade Corner Profile Without Covered Cutting Edges - Profile 9400 length of 2.5m. Corner profiles cover the cutting edges of the facade boards and form a clean, precise edge. Vertical corner profiles must be fastened at one fixed point at the top. If conditions require multiple faste..

150mm Aluminium System Starter Track Profile for Curved Walls for 120mm insulation. Slit the back fixing leg and then bend profile around the curve of the wall...

62mm x 7mm x 9mm Aluminium Black Finish Bird Beak Facade Joint Profile length of 2.5m. Coated on both sides. This joint profile subtly depicts the joint whilst effectively closing it. The beading along the profile also centres and guides the facade cladding joint. If used horizontally and if no..

The WEC 781 Grind in Verge Trim Profile is designed for use in situations where there are problems sealing the rear of the profile. It is also a cost effective way to seal the system instead of increasing the roof line. This profile also has an increased drip section to improve visual appearance and..