9mm Long Plasticlad Stainless Steel TU Fastener for HPL Panels - TUF-S-6x9-A4 - pack of 250
9mm Long Plasticlad Stainless Steel TU Fastener for HPL Panels - TUF-S-6x9-A4 - pack of 250
- Product Code: A1-6777
- Delivery Time: 7 - 10 days
- Brand: Plastestrip (Tech. support: 0172674771)
- Model: TUF-S-6x9-A4
Our ratings on 28-10-2026:
4.8 out of 5
9mm Long Plasticlad Stainless Steel TU Fastener for HPL Panels - TUF-S-6x9-A4 - pack of 250
Length: 9mm
Pack Quantity: 250
9mm Long Plasticlad Stainless Steel TU Fastener for HPL Panels is a high-performance, blind-fix mechanical anchor designed for the "secret fixing" of High-Pressure Laminate (HPL) and fibre cement cladding panels. These fasteners are installed into the rear of the panel, leaving the front decorative face completely untouched and free of visible fixings. The 9mm length is specifically engineered for thinner cladding panels (typically 10mm thick), where a secure mechanical grip is required without the risk of the fastener piercing or telegraphing through the front surface.
CHARACTERISTICS
- Manufactured from A4 (316) stainless steel to provide the highest level of corrosion resistance, making it suitable for even the most demanding coastal environments.
- Enables a "hidden" fixing system, providing a sleek, uninterrupted facade that is highly sought after by architects for modern commercial and residential projects.
- The fastener works by expanding within a pre-drilled blind hole. This creates a secure, vibration-proof friction fit that does not rely on adhesives, which can degrade over time.
Typical installation detail
Brand: Plastestrip
Model: AL/715
Delivery Time: 7 - 10 days
PlastiClad Aluminium Edge Trim AL/715 for Single Panels is a high-precision architectural profile designed to provide a neat, protective termination for individual cladding sheets. This trim is engineered specifically to house the edge of a single, flat panel (such as a large-format composite sheet ..
Brand: Plastestrip
Model: FF FIX/BRD/240
Delivery Time: 7 - 10 days
240mm Plastestrip FastFrame Aluminium Double Helping Hand Bracket - FF FIX/BRD/240 is the primary load-bearing component within the Plastestrip sub-frame system. While the single bracket is typically used for intermediate wind-load support, the double bracket is engineered to act as the Fixed Point,..
Brand: Plastestrip
Model: 555-020-804
Delivery Time: 7 - 10 days
Undercut Anchor for 7mm Embedment is a specialised mechanical fixing designed for the high-end "secret fix" installation of thin cladding panels, typically High-Pressure Laminate (HPL), ceramic, or natural stone. The undercut anchor relies on a precise "undercut" geometry drilled into the rear of th..
Brand: Plastestrip
Model: AL/725
Delivery Time: 7 - 10 days
PlastiClad Aluminium Edge Trim AL/725 (often referred to as a J-trim or End Profile) is a versatile finishing accessory designed for lapped weatherboard cladding systems. Its primary role is to provide a neat, protective, and decorative "stop-end" wherever the weatherboard planks terminate. It is ty..
Brand: Plastestrip
Model: FF FIX/BR/160
Delivery Time: 7 - 10 days
160mm Plastestrip FastFrame Aluminium Single Helping Hand Bracket - FF FIX/BR/160 is the fundamental structural component of the Plastestrip rainscreen support system. It acts as the primary "anchor" between the building's structural substrate (be it masonry, concrete, or steel frame) and the vertic..
Brand: Plastestrip
Model: FF FIX/BR/140
Delivery Time: 7 - 10 days
140mm Plastestrip FastFrame Aluminium Single Helping Hand Bracket - FF FIX/BR/140 is the fundamental structural component of the Plastestrip rainscreen support system. It acts as the primary "anchor" between the building's structural substrate (be it masonry, concrete, or steel frame) and the vertic..