Plastestrip Galvanised Steel C-Channel - ST/CH/30/135 - 3m length
Plastestrip Galvanised Steel C-Channel - ST/CH/30/135 - 3m length
- Product Code: A1-6801
- Delivery Time: 7 - 10 days
- Brand: Plastestrip (Tech. support: 0172674771)
- Model: ST/CH/30/135 - 3m length
Our ratings on 03-11-2026:
4.8 out of 5
Plastestrip Galvanised Steel C-Channel - ST/CH/30/135 - 3m length
Length: 3000mm
Width: 135mm
Height: 30mm
Thickness: 2mm
Fire Rating (Reaction to Fire): A1(Non-combustible)
Plastestrip Galvanised Steel C-Channel - ST/CH/30/135 is a robust, open-faced profile designed to provide a flat, recessed mounting track for the brackets. These horizontal support profiles act as a structural "bridge" between building studs. By installing these horizontally across the face of the studs, you create a continuous mounting surface. This allows the FastFrame or ThermaFrame "helping hand" brackets to be positioned exactly where the facade design requires them, rather than being restricted to the fixed centres of the building's internal frame. The Galvanised Steel C-Channel is a universal component used across both the FastFrame and ThermaFrame systems.
CHARACTERISTICS
- Manufactured from S275 structural-grade galvanised steel.
- A 135mm wide channel specifically sized to provide the perfect mounting footprint for a single FastFrame or ThermaFrame helping-hand bracket.
- Allows the "helping hand" brackets to be positioned exactly where the facade design requires them.
- A universal component used across both the FastFrame and ThermaFrame systems.
FastFrame-Typical-details.pdf
Brand: Plastestrip
Model: AL/VENT/30/100
Delivery Time: 7 - 10 days
PlastiClad Aluminium Vent Trim to Close up to 100mm Cavity AL/VENT/30/100 is a precision-punched architectural trim designed to maintain a continuous air path behind cladding panels while simultaneously acting as a physical barrier against pests. These profiles are typically installed at the base of..
Brand: Plastestrip
Model: AL/BD/86
Delivery Time: 7 - 10 days
PlastiClad Aluminium Bottom Drip Trim AL/BD/86 is a high-specification base profile designed to provide a secure and weathertight termination for the bottom edge of external façade panels (typically 5mm to 9mm in thickness). It is installed at the lowest point of a cladding run to ensure that rainwa..
Brand: Plastestrip
Model: FF FIX/BRD/65
Delivery Time: 7 - 10 days
65mm Plastestrip FastFrame Aluminium Double Helping Hand Bracket - FF FIX/BRD/65 is the primary load-bearing component within the Plastestrip sub-frame system. While the single bracket is typically used for intermediate wind-load support, the double bracket is engineered to act as the Fixed Point, c..
Brand: Plastestrip
Model: G-C06602020 - 6m length
Delivery Time: 7 - 10 days
FastFrame Aluminium Carrier Rail for Mechanical Secret Fix Systems - G-C06602020 is a secondary horizontal profile designed to support cladding panels—such as High-Pressure Laminate (HPL), ceramic, stone, or fibre cement—using an invisible mechanical attachment. Instead of fixing through the face of..
Brand: Plastestrip
Model: PL-PTS-WASH-0.9
Delivery Time: 7 - 10 days
0.9mm Plasticlad Stainless Steel Spacer Washer is a premium component designed for use with PTS fixings in rainscreen cladding systems. These washers are specifically designed to create a defined gap between the cladding panel and the supporting subframe (whether timber or metal).CHARACTERISTICSManu..
Brand: Plastestrip
Model: AL/125
Delivery Time: 7 - 10 days
PlastiClad Symmetric Aluminium External Corner AL/125 is a crucial, high-grade trim specifically designed for the installation of lapped weatherboard cladding systems such as fibre cement or composite planking. Its primary function is to provide a clean, weathertight, and robust finish where the wea..