STEICOzell - Air-Injected Wood-Fibre Insulation - 15kg bale - pallet of 21 bales
STEICOzell - Air-Injected Wood-Fibre Insulation - 15kg bale - pallet of 21 bales
- Product Code: A1-7029
- Delivery Time: 2 - 4 weeks
- Brand: Steico
- Model: 15kg bale - pallet of 21 bales
- Weight: 335.00kg
Our ratings on 26-10-2026:
4.8 out of 5
1STEICOzell - Air-Injected Wood-Fibre Insulation - 15kg bale - pallet of 21 bales
Density: 32kg/m3
Weight: 335kg
Fire Rating (Reaction to Fire): E
STEICOzell is a loose-fill insulation made from natural wood fibres. It is blown into closed compartments (like between rafters or floor joists) or onto open loft floors using a specialised blowing machine. It provides a seamless, joint-free insulation layer that adapts perfectly to any shape. While boards are great for flat, open loft floors, this STEICOzell air-injected insulation is the solution for those hard-to-reach nooks and crannies.
Density: Open blown: attic floor: approx. 32 kg/m³ /Closed cavities: roof, ceiling, wall: approx. 35 - 45 kg/m³
CHARCTERISTICS
- When professionally installed into compartments, the wood fibres interlock with each other. This creates a friction-fit that prevents the insulation from settling or sagging over time, even in vertical wall cavities.
- Because it is blown in under pressure, it finds every small gap and void around pipes, cables, or irregular timber. This eliminates the thermal bridging often found with poorly cut batts or boards.
- Like all Steico products, it has excellent heat storage capacity. This is particularly effective in roof spaces for preventing summer overheating, which is a common issue in many British loft conversions.
- It is vapour-permeable, allowing the building to breathe. It also has the same carbon-sequestering benefits as the solid wood-fibre boards.
- There are no off-cuts or scraps. You only use exactly the amount of material required to fill the volume of the space.
APPLICATION
- Roof Renovation: Filling the voids between rafters when insulating from either the inside or outside.
- Timber Frame Walls: Injecting into wall cavities for a completely filled, airtight insulation layer.
- Floor Joists: Filling the space between floor joists to improve both thermal performance and acoustic insulation.
- Loft "Top-up": Can be blown as an open-fill layer onto a loft floor for rapid insulation of large attic spaces.
CERTIFICATION
STEICO_Zell_Technical_Data_Sheet.pdf
Brand: Steico
Model: 1880mm x 600mm - 1.13m2
Delivery Time: 2 - 4 days
40mm STEICO Universal Dry is a high-performance, rigid wood-fibre board designed for both roof and wall applications. It is engineered to provide a wind-tight, weather-protecting "skin" for the building envelope. Using the dry manufacturing process allows for a board that is easier to handle than it..
Brand: Steico
Model: 600ml - pack of 12
Delivery Time: 2 - 4 weeks
STEICOmulti Connect is a professional-grade, permanently elastic adhesive sealant. It is the go-to solution for creating airtight connections between membranes and difficult or uneven substrates, such as masonry, concrete, or rough timber, where traditional tapes might struggle to maintain a continu..
Brand: Steico
Model: 1.5m x 50m - 75m2
Delivery Time: 2 - 4 days
STEICOmulti UDB is a highly vapour-permeable, 3-layer roofing and wall membrane. It is engineered to provide a secondary water-shedding layer and an airtight outer seal for roof and wall constructions. It is particularly effective when used in conjunction with blown-in wood-fibre insulation, as it i..
Brand: Steico
Model: 1200mm x 380mm - 0.46m2
Delivery Time: 2 - 4 days
80mm STEICOtherm Internal Wet is an ecological, vapour-open insulation board designed for applications where moisture management and thermal mass are critical. The Square Edge (SE) profile makes it particularly suitable for internal wall insulation (IWI) and floor systems where a tight, flush fit is..
Brand: Steico
Model: 2230mm x 600mm - 37.52m2
Delivery Time: 2 - 4 weeks
80mm STEICO Special Dry is a multi-purpose, rigid wood-fibre insulation board manufactured using the modern Dry Process. It is designed to be installed on top of rafters (sarking) or on the outside of timber frame studs (sheathing). Because it is produced in a dry process, it can be manufactured in ..
Brand: Steico
Model: 1.5m x 50m - 75m2
Delivery Time: 2 - 4 days
STEICOmulti Membra 5 is a reinforced, vapour-retarding membrane designed for internal use in roof, wall, and ceiling constructions. It is engineered to create a permanent airtight seal for the building envelope while managing the flow of water vapour into the insulation layer to prevent interstitial..