75mm Unilin XtroLiner XO/PR Pitched Roof PIR Insulation Board - 1200mm x 2400mm - Pack of 4
75mm Unilin XtroLiner XO/PR Pitched Roof PIR Insulation Board - 1200mm x 2400mm - Pack of 4
- Product Code: A1-5017
- Delivery Time: 1-3 working days
- Brand: Unilin (prev. Xtratherm) (Tech. support: 03712221055)
- Model: 1200x2400mm - 11.52m2
Our ratings on 17-09-2026:
4.8 out of 5
75mm Unilin XtroLiner XO/PR Pitched Roof PIR Insulation Board - 1200mm x 2400mm - Pack of 4
Length: 2400mm
Width: 1200mm
Thickness: 75mm
Pack Quantity: 4
Board Coverage: 2.88m2
Pack coverage: 11.52m2
Thermal Conductivity: 0.021W/mK
R-Value: 3.55m2K/W
Compressive Strength: 150kPa
75mm Unilin XtroLiner XO/PR board has a core of modified polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings. Unilin XtroLiner XO/PR board offers excellent insulation performance with excellent thermal conductivity. Unilin XtroLiner XO/PR is CFC & HCFC free and is manufactured under the highest standards of ISO 9001 and 14001 Quality and Environmental Management Systems.
Note: This product was formerly known as 75mm Xtratherm XtroLiner XO/PR Pitched Roof PIR Insulation Board
CHARACTERISTICS
- High Thermal Performance Rigid Insulation,
- Easy to Install,
- Non-deleterious material,
- Suitable for new build and refurbishment,
- Manufactured with zero ODP blowing agent,
- Reduces Thermal Bridging,
- Reaction to fire: Euroclass C s2 d0,
- Closed cell structure – moisture resistant
APPLICATION
- Pitched roof
- Ventilated roof
- Warm roof
- Above and between rafters
- Under rafters, above ceilings
INSTALLATION
Ventilated Roofs
- Allow for ventilation gaps normally 50mm. (May be reduced depending on breather membrane certification).
- Cut XtroLiner boards to fit tightly between rafters flush with rafter bottom. An additional 2nd layer should be added to the underside of the rafter.
- Run second layer transverse to the first.
- Temporarily fix with nails.
- Provide vapour control layer (Aluminium tape joints).
- Finish with 12.5mm plasterboard fixed with drylining screws. Screw fix every 150mm, 12mm from edge of boards.
- All board edges should be supported.
Warm roofs
- Ensure cavity wall insulation has continued to roof height to engage with roof insulation.
- Fix a timber stop rail to end of rafter at eaves.
- Lay Unilin XtrolinerXO/PR insulation stagger jointed over rafters ensuring joints are supported by rafters.
- Ensure boards are tightly butted fill any gaps with expanding foam. A vapour permeable underlay should be fitted; refer to manufacturers Agrèment certification.
- Providing an unvented void under the membrane can improve the thermal performance.
- Fix counter batten with approved fixings.
- Ventilation may have to be provided subject to certification.
- A second layer of insulation may be added between the rafters.
- Provide a vapour control layer to the underside of the construction.
- Current Building Regulations/Standards should be considered with regard to the requirements for and/or provision of fire stops.
CERTIFICATION
BBA_Certificate_Xtroliner_XO_PR.pdf
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 2400mm - 2.88m2
Delivery Time: 1-3 working days
42.5mm Unilin Thin-R Thermal Liner XT/TL-MF is a composite insulated panel of 30mm Unilin PIR core with foil faces bonded to 12.5mm tapered edge plasterboard for mechanically fixing to internal walls. Unilin XT/TL-MF is designed to provide high levels of thermal insulation and dry lining in one oper..
Guide Price: £47.53
£57.04 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 1200mm - 20.16m2
Delivery Time: 3 - 5 days
30mm Unilin FR-BGM is a BBA certified high performance PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. Unilin FR-BGM is suitable to apply torch on felt directly on the insulation. FR..
Guide Price: £280.39
£336.47 inc VAT
Brand: Unilin (prev. Xtratherm)
Model: 1200x600mm - 2.88m2
Delivery Time: 1-3 working days
75mm Unilin Stonewool SW/RS Insulation Slab is a non-combustible Euroclass A1 stone wool insulation used as ventilated rainscreen façade and framing applications and curtain walling. Unilin Stonewool SW/RS insulation provides a uniform, high density solution providing resilience during the buil..
Brand: Unilin (prev. Xtratherm)
Model: 1200x2400mm - 8.64m2
Delivery Time: 1-3 working days
125mm Unilin ECO360 MA Sarking PIR Insulation board has a bio-enhanced, halogen free core of modified polyisocyanurate (PIR) pitched roof insulation bonded to textured low emissivity foil facings. Unilin ECO360 MA Sarking board offers excellent insulation performance with excellent th..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200 - 11.52m2
Delivery Time: 2 - 3 working days
92.5mm Unilin Safe-R SR/TB is a composite insulated panel of of 80mm Unilin Phenolic core with a glass tissue facing, bonded to a 12.5mm tapered edge plasterboard for internal applications. Unilin Safe-R SR/TB composite insulation board is fixed with dot & dab adhesive bonding. It is designed to..
Guide Price: £461.66
£553.99 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 1200mm - 5.76m2
Delivery Time: 3 - 5 days
110mm Unilin FR/MG is a high performance PIR core with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt. It is compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed ..
Guide Price: £161.64
£193.97 inc VAT