Plastestrip Galvanised Steel C-Channel - ST/CH/30/135 - 3m length
Plastestrip Galvanised Steel C-Channel - ST/CH/30/135 - 3m length
- Product Code: A1-6801
- Delivery Time: 7 - 10 days
- Brand: Plastestrip (Tech. support: 0172674771)
- Model: ST/CH/30/135 - 3m length
Our ratings on 24-07-2026:
4.8 out of 5
Plastestrip Galvanised Steel C-Channel - ST/CH/30/135 - 3m length
Length: 3000mm
Width: 135mm
Height: 30mm
Thickness: 2mm
Fire Rating (Reaction to Fire): A1(Non-combustible)
Plastestrip Galvanised Steel C-Channel - ST/CH/30/135 is a robust, open-faced profile designed to provide a flat, recessed mounting track for the brackets. These horizontal support profiles act as a structural "bridge" between building studs. By installing these horizontally across the face of the studs, you create a continuous mounting surface. This allows the FastFrame or ThermaFrame "helping hand" brackets to be positioned exactly where the facade design requires them, rather than being restricted to the fixed centres of the building's internal frame. The Galvanised Steel C-Channel is a universal component used across both the FastFrame and ThermaFrame systems.
CHARACTERISTICS
- Manufactured from S275 structural-grade galvanised steel.
- A 135mm wide channel specifically sized to provide the perfect mounting footprint for a single FastFrame or ThermaFrame helping-hand bracket.
- Allows the "helping hand" brackets to be positioned exactly where the facade design requires them.
- A universal component used across both the FastFrame and ThermaFrame systems.
FastFrame-Typical-details.pdf
Brand: Plastestrip
Model: PL-PTS-WASH-0.9
Delivery Time: 7 - 10 days
0.9mm Plasticlad Stainless Steel Spacer Washer is a premium component designed for use with PTS fixings in rainscreen cladding systems. These washers are specifically designed to create a defined gap between the cladding panel and the supporting subframe (whether timber or metal).CHARACTERISTICSManu..
Brand: Plastestrip
Model: G-C06602020 - 6m length
Delivery Time: 7 - 10 days
FastFrame Aluminium Carrier Rail for Mechanical Secret Fix Systems - G-C06602020 is a secondary horizontal profile designed to support cladding panels—such as High-Pressure Laminate (HPL), ceramic, stone, or fibre cement—using an invisible mechanical attachment. Instead of fixing through the face of..
Brand: Plastestrip
Model: RIVETS/14/23
Delivery Time: 1-3 working days
Plastestrip 16mm Head Aluminium Rivets for fixing cladding panels to aluminium support rails. Can be powder coated to any colour. Stainless steel mandrel. Big head for better load distribution, which is an advantage for fastening of soft materials. 23mm length
Available rivet sizes and dimens..
Brand: Plastestrip
Model: AL/VENT/30/100
Delivery Time: 7 - 10 days
PlastiClad Aluminium Vent Trim to Close up to 100mm Cavity AL/VENT/30/100 is a precision-punched architectural trim designed to maintain a continuous air path behind cladding panels while simultaneously acting as a physical barrier against pests. These profiles are typically installed at the ba..
Brand: Plastestrip
Model: AL/BD/15
Delivery Time: 7 - 10 days
PlastiClad Aluminium Bottom Drip Trim AL/BD/15 is a high-specification base profile designed to provide a secure and weathertight termination for the bottom edge of external façade panels (typically 10mm to 15mm in thickness). It is installed at the lowest point of a cladding run to ensure that..
Brand: Plastestrip
Model: 555-020-823
Delivery Time: 7 - 10 days
Undercut Anchor for 8.5mm Embedment is a specialised mechanical fixing designed for the high-end "secret fix" installation of thin cladding panels, typically High-Pressure Laminate (HPL), ceramic, or natural stone. The undercut anchor relies on a precise "undercut" geometry drilled into the rear of ..