Plastestrip L-Rail for Intermediate Panel Supports - FIX/ANG/HD/60/40 - 6m length
Plastestrip L-Rail for Intermediate Panel Supports - FIX/ANG/HD/60/40 - 6m length
- Product Code: A1-6797
- Delivery Time: 7 - 10 days
- Brand: Plastestrip (Tech. support: 0172674771)
- Model: FIX/ANG/HD/60/40 - 6m length
Our ratings on 26-10-2026:
4.8 out of 5
Plastestrip L-Rail for Intermediate Panel Supports - FIX/ANG/HD/60/40 - 6m length
Length: 6000mm
Width: 40mm
Height: 60mm
Thickness: 2mm
Plastestrip L-Rail is a high-strength, extruded aluminium profile used as a vertical support member in rainscreen cladding sub-frames. Its primary function is to provide additional points of contact behind a cladding panel, ensuring the facade remains rigid and resistant to wind pressure without the need for the wider face provided by a T-Rail. The L-Rails (and T-Rails) are universal components used across both the FastFrame and ThermaFrame systems.
CHARACTERISTICS
- 40mm face, 60mm leg.
- Made from high specification 6063 T6 grade aluminium.
- While T-Rails are used at the junctions where two panels meet, the L-Rail is designed to support the "field" or centre of the cladding panel.
- L-Rails are positioned between the T-Rails to reduce the "span" of the cladding panel. This prevents the panels from bowing or vibrating under wind loads, ensuring the long-term flat appearance of the facade.
- The leg of the L-Rail allows for significant "telescopic" adjustment within the helping-hand bracket. This makes it easy for installers to "plumb up" the rails, creating a perfectly vertical surface even if the structural wall behind is out of alignment.
FastFrame-Typical-details.pdf
Brand: Plastestrip
Model: FF FIX/BR/180
Delivery Time: 7 - 10 days
180mm Plastestrip FastFrame Aluminium Single Helping Hand Bracket - FF FIX/BR/180 is the fundamental structural component of the Plastestrip rainscreen support system. It acts as the primary "anchor" between the building's structural substrate (be it masonry, concrete, or steel frame) and the vertic..
Brand: Plastestrip
Model: AL/VENT/30/100
Delivery Time: 7 - 10 days
PlastiClad Aluminium Vent Trim to Close up to 100mm Cavity AL/VENT/30/100 is a precision-punched architectural trim designed to maintain a continuous air path behind cladding panels while simultaneously acting as a physical barrier against pests. These profiles are typically installed at the base of..
Brand: Plastestrip
Model: TUF-S-6x7.5-A4
Delivery Time: 7 - 10 days
7.5mm Long Plasticlad Stainless Steel TU Fastener for HPL Panels is a high-performance, blind-fix mechanical anchor designed for the "secret fixing" of High-Pressure Laminate (HPL) and fibre cement cladding panels. These fasteners are installed into the rear of the panel, leaving the front decorativ..
Brand: Plastestrip
Model: ST/TH/30/30/185 - 3m length
Delivery Time: 7 - 10 days
Plastestrip Galvanised Steel Top Hat Profile - ST/TH/30/30/185 features a raised central section with two fixing flanges. This is often preferred when the installer needs to maintain a specific cavity depth or requires more surface area for fixing. These horizontal support profiles act as a structur..
Brand: Plastestrip
Model: PVC/50
Delivery Time: 7 - 10 days
50mm Blackout Tape for Aluminium Rails is a high-performance, self-adhesive solution designed to enhance the aesthetic finish of rainscreen cladding systems. By applying this tape directly to the face of aluminium support rails, installers can ensure that the joints between cladding panels remain vi..
Brand: Plastestrip
Model: AL/ST60
Delivery Time: 7 - 10 days
PlastiClad Aluminium Starter Trim AL/ST60 is the foundational component of any weatherboard installation. It is the very first profile to be installed, ensuring that the first course of cladding planks is set at the correct angle and height. It is fixed horizontally at the lowest point of the instal..