70mm Unilin FR/MG Flat Roof Board - pack of 7
Guide Price
70mm Unilin FR/MG Flat Roof Board - pack of 7
Guide Price: £195.04 (£234.05 inc VAT)
Price per m2: £19.35/m2 (£23.22 inc VAT)
- Product Code: A1-5279
- Delivery Time: 3 - 5 days
- Brand: Unilin (prev. Xtratherm) (Tech. support: 03712221055)
- Model: 1200mm x 1200mm - 10.08m2
- Weight: 21.60kg
Our ratings on 17-09-2026:
4.8 out of 5
70mm Unilin FR/MG Flat Roof Board - pack of 7
Length: 1200mm
Width: 1200mm
Thickness: 70mm
Pack Quantity: 7
Board Coverage: 1.44m2
Pack Coverage: 10.08m2
Density: 30kg/m3
Weight/m2: 2.1kg
Weight: 21.6kg
Thermal Conductivity: 0.024W/mK
R-Value: 2.92m2K/W
Compressive Strength: 150kPa
70mm Unilin FR/MG is a high performance PIR core with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt. It is compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed or adhered boards.
APPLICATION
- Rooftop decks subject to maintenance traffic,
- Below most single-ply fully adhered and mechanically fixed roof membrane systems or loose laid ballasted roofing systems.
CHARACTERISTICS
- High Thermal Performance,
- Both sides coated with mineral coated glass facers,
- Suitable for full bonding with approved adhesive systems,
- Compatible with adhesively bonded single-ply roofing membranes laid on mechanically fixed boards.
CERTIFICATION
Unilin_FRMG_Datasheet.pdf
Brand: Unilin (prev. Xtratherm)
Model: 1200x2400mm - 5.76m2
Delivery Time: 1-3 working days
150mm Unilin Thin-R Hyfloor XT/HYF is a high performance floor Insulation board with superior thickness to performance ratio allowing the lower targets required under the new Building Regulations to be achieved with minimum thicknesses. Unilin Thin-R Hyfloor XT/HYF is a high performance foil faced P..
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 2.88m2
Delivery Time: 7 - 10 days
92.5mm Unilin Safe-R 019/TB-MF Phenolic Composite Insulated Panel is a composite insulated panel designed to provide high thermal performance and drylining in a single operation. It combines a rigid phenolic insulation core with a composite foil facing, factory‑bonded to 12.5 mm tapered‑edge plaster..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 2.88m2
Delivery Time: 1-3 working days
65mm Unilin Thin-r XT/PR-UF has a core of polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings. Unilin XT/PR-UF board offers excellent insulation performance with excellent thermal conductivity. Unilin XT/PR-UF is CFC & HCFC free and is manufactured under the high..
Guide Price: £38.23
£45.88 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 1200mm - 4.32m2
Delivery Time: 3 - 5 days
120mm Unilin FR-BGM is a a BBA certified high performance PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. Unilin FR-BGM is suitable to apply torch on felt directly on the insulation...
Guide Price: £143.81
£172.57 inc VAT
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 11.52m2
Delivery Time: 7 - 10 days
80mm Unilin Safe-R 019/MA (Floors) is a high‑performance phenolic floor insulation board designed to deliver excellent thermal efficiency with minimal thickness. It is commonly used below screeds, timber floors and concrete slabs where achieving low U‑values is essential without increasing floor bui..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 2400mm - 2.88m2
Delivery Time: 1-3 working days
59.5mm Unilin XT/TL Thermal Liner Dot and Dab Insulated Plasterboard is a high performance rigid insulation board made from 50mm Unilin PIR core faced with composite kraft paper bonded to 9.5mm plasterboard, specially designed for internal walls dry lining and insulation, due to its closed cell comp..
Guide Price: £59.23
£71.08 inc VAT